A.J.Anto's WebLog

That's pretty useful.

RePost:
http://www.yeyan.cn/Programming/DHCPServerDocumentation.aspx

Hi..

This is of great help but its not working at my end.

When I try to get the dump of my scope it gives me error

*********************************************

netsh dhcp server scope>dump> d:\scope\reserved.txt
The following command was not found: dump> d:\scope\reserved.txt.
netsh dhcp server scope>dump>d:\scope\reserved.txt
The following command was not found: dump>d:\scope\reserved.txt.
netsh dhcp server scope>exit


C:\>netsh dhcp server 10.0.0.19 scope 10.0.0.0  dump>dump.txt
Access is denied.

C:\>netsh dhcp server 10.0.0.19 scope 10.0.0.0  dump>dump.txt
Access is denied.

C:\>netsh
netsh>dhcp
netsh dhcp>server
netsh dhcp server>10.0.019
The following command was not found: 10.0.019.
netsh dhcp server>10.0.0.19
netsh dhcp server>scope 10.0.0.0 dump>dump.txt

Changed the current scope context to 10.0.0.0 scope.
The following command was not found: scope 10.0.0.0 dump>dump.txt.
netsh dhcp server>?
list                          - Lists all the commands available.
dump                          - Dumps configuration to a text file.
help                          - Displays help.
?                             - Displays help.
add                           - Adds a configuration entry to a table.
delete                        - Deletes a configuration entry from a table.
export                        - Exports the configuration to a file.
import                        - Imports the configuration from a file.
initiate                      - Initiates an operation.
set                           - Sets configuration information.
show                          - Displays information.
scope <scope-ip-address>      - To switch to the scope identified by
                               the IP address.
mscope <mscope-name>          - To switch to the mscope identified by
                               the MScope name.

netsh dhcp server>scope 10.0.0.0

Changed the current scope context to 10.0.0.0 scope.
netsh dhcp server scope>dump>dump.txt
The following command was not found: dump>dump.txt.
netsh dhcp server scope>?
list                          - Lists all the commands available.
dump                          - Dumps scope configuration to a text file.
help                          - Displays help.
?                             - Displays help.
add                           - Adds a configuration entry to a table.
delete                        - Deletes a configuration entry from a table.
initiate                      - Initiates an operation.
set                           - Sets configuration information.
show                          - Displays information.

netsh dhcp server scope>help
list                          - Lists all the commands available.
dump                          - Dumps scope configuration to a text file.
help                          - Displays help.
?                             - Displays help.
add                           - Adds a configuration entry to a table.
delete                        - Deletes a configuration entry from a table.
initiate                      - Initiates an operation.
set                           - Sets configuration information.
show                          - Displays information.

netsh dhcp server scope>show
The command is incomplete. The possible completions are:

show clients                  - Displays all available version 4 client for
                               the scope.
show clientsv5                - Displays all available version 5 client for
                               the scope.
show excluderange             - Displays all available exclusion ranges for
                               the scope.
show iprange                  - Displays all available IP ranges for the scope.
show optionvalue              - Displays all options that are set for the scope.

show reservedip               - Displays all available reservation address for
                               the scope.
show reservedoptionvalue      - Displays the options set for a particular
                               reservation address in the scope.
show scope                    - Displays the current scope.
show state                    - Displays the current state of the scope.
netsh dhcp server scope>show scope

Current Scope 10.0.0.0 in the Server 10.0.0.19.
netsh dhcp server scope>

***********************************************

Please let me know where I am wrong, I tried all different combinations.

Thanks in Advance.

Damal Raval

this is the coorect sentex

C:\>netsh dhcp server 10.0.0.19 scope 10.0.0.0  dump >dump.txt

I think you forgot to leave a space after ">"

try it again, Thanks.

sorry for the mistake eralier,

this is the correct sentex

C:\>netsh dhcp server 10.0.0.19 scope 10.0.0.0  dump >dump.txt

I think you forgot to leave a space before ">"

try it again, Thanks.

Hi Anto,

Hope you can help.

I am trying to get work "netsh dhcp server" commands on an XPPro and/or Vista Ent PC.

I always get the error: "the following command was not found: netsh dhcp server". However I was able to make it work a on my previous XPPro PC. I tried installing "admin tools" "Support Tools" "Resource Kit". No joy. I can  not remmeber how I did make that work. Hope you can help.

Tks in advance

Rgds

Emmanuel

I have a problem. We are using a surf control system that sniffs the wire and allows/disallows web access. The problem is when the reports are run, it pulls the incorrect machine name often because another machine has taken that IP. We have over 20K machines, and about 50 subnets, so reservations are not practical. I am thinking about creating another database with machine name-mac addr-IP, but it seems there should be another way. Any ideas? Thanks, Charles