Rincón de Héctor Calvarro
Blog sobre SharePoint, Visual Studio .NET y tecnologías Microsoft

  • Rincón de Héctor Calvarro

    Available April 2013 Cumulative Updates for SharePoint 2010 and MOSS 2007

    • 0 Comments

    Hi

    It's ready to download April 2013 CUs for SPS 2010 and MOSS 2007

    SharePoint 2010 (Build 14.0.6137.5000) 

    (REMEMBER TO INSTALL FIRST SP1)

    After installing the updated you should run the SharePoint Config Wizard in every server of the farm.

    If SPS 2010 installed you must only install the SPS 2010 CU because it includes the Foundation one.

    After installing the updated you should run the SharePoint Config Wizard in every server of the farm.

    After you install this hotfix, you must restart the User Profile Synchronization Service for profile synchronization to function correctly.

    To work around this issue, follow these steps:

    1.Visit Central Administration.
    2.Click Manage Services on the System Settings section.
    3.Find User Profile Synchronization Service in the list of services and then click Stop if its status is Started. Click Start and provide the credentials to start the User Profile Synchronization Service as soon as its status is Stopped.

    For more information, see the Start the User Profile Synchronization service section in the Configure profile synchronization article in the library.

     

    SharePoint 2007 (Build 12.0.6676.5000)

    Warning! This update will be only install if SP3 is installed in the environment.

    Please, keep in mind that you must install them in the following order first WSS 3.0, and later MOSS 2007.

    After installing the updates you must execute the SharePoint configuration wizard in each of the servers of the farm or execute  “psconfig –cmd upgrade –inplace b2b -wait” on a cmd.

    Regards

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA

  • Rincón de Héctor Calvarro

    8ª Conferencia Española de Usuarios de SharePoint - CEUS VIII

    • 0 Comments

    Hola

    La próxima semana tendrá lugar el Martes 9 de Abril de 2013,  8ª Conferencia Española de Usuarios de SharePoint - CEUS VIII en el Teatro Goya en Madrid. Como sabéis es un evento donde usuarios, partners y Microsoft se reúnen y tratan sobre nuevas características, posibilidades y escenarios de clientes sobre SharePoint 2013 y SharePoint On-line.

    Además, por parte de soporte Premier estaremos Matias Cordero, Enrique Palomino  y yo ,Héctor Calvarro, haciendo una pequeña presentación sobre Performance Point en SharePoint Server 2013 en el track de B.I.

    Para consultar la agenda y apuntaros, podéis visitar el siguiente link:

    https://msevents.microsoft.com/CUI/EventDetail.aspx?EventID=1032545292&Culture=es-ES&community=0

    Muchas Gracias.

    Saludos.

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA.

  • Rincón de Héctor Calvarro

    Fix on Software boundaries and limits for SharePoint 2013 documentation

    • 2 Comments

    Hi

    It has been detected a bug documentation on Software boundaries and limits for SharePoint 2013 http://technet.microsoft.com/en-us/library/cc262787.aspx for Spanish, Italian and French languages, among others languages except English.

    The bug is concerning the Web Applciation section that does not reflect that SharePoint 2013 supports farms of 20 Web Application or less.

    Now, the bug is on fix process.

    BTW, the documentation on English prevails over the other languages.

    THX

    Kind Regards.

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA.

  • Rincón de Héctor Calvarro

    Windows 8 MSDN Sample Browser

    • 0 Comments

    Hi all.

    Good tool for Windows 8 in order to search and download MSDN Sample codes from MSDN code gallery using Moden UI

    Click here for dowload it

    http://apps.microsoft.com/windows/en-US/app/sample-browser/6fd83c79-a2fc-4887-9284-535681eb3993

    For further info please visit the oficial web page of the tool

    http://blogs.msdn.com/b/onecode/

     

    THX

    Kind Regards.

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA

  • Rincón de Héctor Calvarro

    Available for download Public Update March 2013 SharePoint 2013 Foundation & Server and the February 2003 CU for WorkFlow Manager & Bus Service

    • 0 Comments

    Hello all

    There has been released March 2013 Public Updates for SharePoint 2013. In somehow, they are like the February 2013 CU + some extra updates

    Please, they are mandatory in order to install next April 2013 and onward CUs.

    SharePoint Foundation 2013 Public Update - KB 2768000

    SharePoint Server 2013 Public Update - KB 2767999

    ATENCIÓN

    If you have a farm with search component and high availability search topologies enabled; you should follow next entry:

    http://blogs.technet.com/b/tothesharepoint/archive/2013/03/13/how-to-install-update-packages-on-a-sharepoint-farm-where-search-component-and-high-availability-search-topologies-are-enabled.aspx

    If you are installed in SharePoint Server 2013 bear in mind that the server one includes the foundation. It's not needed to install foundation.

    Furthemore, if you have any server running Workflow Manager and Service Bus, their Cus are also available:

    Workflow Manager February 2013 Cumulative Update - KB 2799754

    Bus Service February 2013 Cumulative Update - KB 2799752

    THX.

    Regards.

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA

  • Rincón de Héctor Calvarro

    Available for download Office Developer Tools for VS 2012 RTM

    • 0 Comments

    Hi 

    S. Somasegar, the corporate vice president of the Developer Division at Microsoft, has announced the Office Developer Tools for VS 2012 RTM

    You can download it from:

                   http://aka.ms/OfficeDevToolsForVS2012

    For more info, please check:

    http://blogs.msdn.com/b/somasegar/archive/2013/03/04/now-available-office-developer-tools-for-visual-studio-2012.aspx

    THX

    Kind Regards.

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA

  • Rincón de Héctor Calvarro

    Available February 2013 Cumulative Updates for SharePoint 2010 and MOSS 2007

    • 0 Comments

    Hi

    It's ready to download February 2013 CUs for SPS 2010 and MOSS 2007

    SharePoint 2010 (Build 14.0.6134.5000) 

    (REMEMBER TO INSTALL FIRST SP1)

    After installing the updated you should run the SharePoint Config Wizard in every server of the farm.

    If SPS 2010 installed you must only install the SPS 2010 CU because it includes the Foundation one.

    After installing the updated you should run the SharePoint Config Wizard in every server of the farm.

    After you install this hotfix, you must restart the User Profile Synchronization Service for profile synchronization to function correctly.

    To work around this issue, follow these steps:

    1.Visit Central Administration.
    2.Click Manage Services on the System Settings section.
    3.Find User Profile Synchronization Service in the list of services and then click Stop if its status is Started. Click Start and provide the credentials to start the User Profile Synchronization Service as soon as its status is Stopped.

    For more information, see the Start the User Profile Synchronization service section in the Configure profile synchronization article in the library.

     

    SharePoint 2007 (Build 12.0.6673.5001)

    Warning! This update will be only install if SP3 is installed in the environment.

    Please, keep in mind that you must install them in the following order first WSS 3.0, and later MOSS 2007.

    After installing the updates you must execute the SharePoint configuration wizard in each of the servers of the farm or execute  “psconfig –cmd upgrade –inplace b2b -wait” on a cmd.

    Regards

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA

  • Rincón de Héctor Calvarro

    Microsoft Office Developer Tools for Visual Studio 2012 - Preview 2 is not supported

    • 0 Comments

    Hello

    Maybe some of you have started to use Microsoft Office Developer Tools for Visual Studio 2012 - Preview 2 in order to develop for SharePoint 2013.

    We would like to let you know that ,so far, the component is not supported (delivered "AS IS"). So  if you have any issue you need to wait until the RTM release in order to open a case.

    Please, check the license of this component that is attached to this post and you should check points 10, 14 and 15 for more detailed info.

    PLEASE CLICK FOR DOWNLOAD THE LICENSE

    Otherwise, you can post an entry in the following fórum for questions regarding this component.

                 http://social.msdn.microsoft.com/Forums/en-US/category/apps

    THX

    Kind regards.

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA

  • Rincón de Héctor Calvarro

    SharePoint 2013 scenarios to take in account

    • 1 Comments

    Hello

    With the General Availability of SharePoint 2013, I would like to share with you some points to have a healthy and supported environment.

    The following scenarios are NOT supported

    • You install SharePoint Server 2013 in a workgroup.
    • You install SharePoint Server 2013 on a domain controller. This scenario is supported only for development configurations and not for production configurations.
    • You install SharePoint Server 2013 on Windows Web Server.
    • You install SharePoint Server 2013 on a virtual machine (VM) that uses Dynamic Memory. For more information about best practice configurations for SharePoint Server 2013 and virtual machines, go to the following Microsoft TechNet website:

    Another strong point is the Contemporary UI that renders in HTML5 for mobile browsers, between others mobile views.So, the following mobile browsers detailed in TechNet are the supported ones:

            http://technet.microsoft.com/en-us/library/fp161353.aspx

    Finally, please bear in mind that SPS 2013 is built on .NET 4.5 RTM in order to develop new .NET projects, although becasue of the new Apps development model there will be a lot of custom functionality relying on JavaScript.

    Saludos.

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA

  • Rincón de Héctor Calvarro

    DevCamp: crea tus aplicaciones para Office 2013 y SharePoint 2013

    • 0 Comments

    ¿Qué te parecería crear soluciones para Microsoft Office y SharePoint 2013, usando tecnologías web estándar, y poder distribuirlas a millones de personas en todo el mundo desde la tienda de Office en Office.com? No te pienses mucho la respuesta, ¡ya puedes hacerlo!

    Ven a nuestro DevCamp y aprende cómo conseguirlo.

    Contenidos incluidos:

    • Creación de aplicaciones para Office
    • Creación de aplicaciones para SharePoint (Office 365 SharePoint Online)
    • Uso de tecnologías web estándar para crear aplicaciones siguiendo el modelo de aplicaciones en la nube

    Si quieres aprender más sobre las aplicaciones para Office y/o SharePoint visita dev.office.com

    Precio

    El registro a este evento es gratuito, pero debes estar registrado para poder asistir. Los asistentes cargarán con los gastos de reserva y pago de su alojamiento y/o viajes. Las comidas serán provistas por la organización del evento.

    Cómo registrarte

    Para registrarte en este evento, dirígete aquí y selecciona el lugar y día que prefieras (o en los enlaces para el registro en Madrid que tienes a la derecha). Esta invitación no garantiza tu plaza, recibirás una notificación informándote sobre el estado de tu registro en menos de 5 días laborales tras la cumplimentación de tu registro. Ten en cuenta que, debido a la cantidad limitada de plazas, estas se limitan a dos por empresa.

    Registro:

    Madrid, día 4 de Marzo de 2013

    Madrid, día 6 de Marzo de 2013

    Nivel:

    300

    Idioma:
    Inglés

    Audiencia: 
    Arquitectos / Desarrolladores web

     

    Preguntas:
    Email: jumpstapps@microsoft.com

     
  • Rincón de Héctor Calvarro

    Supported Namespaces JavaScript Client Object model SharePoint Server 2010 & 2013

    • 0 Comments

    Hello

    In this day and age more and more customers are choosing to use Jquery in their customized pages and choose the JavaScript client object model in SharePoint 2010 and 2013. However, it turns out that anyone with skills can reverse engineer debugging the JavaScript client used internally by Microsoft but it shouldn't be used by customers / Developers.

    Recently a customer reported an issue we using that kind of JavaScript. The code was as follows.

    function FuncNaive1() {

            var OldCalendarNotify4a = SP.UI.ApplicationPages.CalendarNotify.$4a; /cahnge to $4b if Sp1 or later

            SP.UI.ApplicationPages.CalendarNotify.$4a = function ()          

               OldCalendarNotify4a();

                FuncNaive2();

            }

        }

    As you can see, the code was calling to an internal function called SP.UI.ApplicationPages.CalendarNotify.$4a and even the customer was completely arware that we should change the var to $4b if SP1 or later. The internal function code looks as following:

    Then he overwrites the function calling the old functionality and a new one created by him

    It turns out that these actions are completely unsupported. It's not expected that a developer/customer call the function SP.UI.ApplicationPages.CalendarNotify.$4a due to it's not documented in the SDK of SharePoint 2010 nor SharePoint 2013, moreover you shouldn't "override" an internal function. Another point to add it's that Microsoft is free of changing the internal functionality, as you see in the customer comment concerning the SP1

    Some months ago I talked regarding this topic in the blog http://blogs.msdn.com/b/calvarro/archive/2012/09/27/reflection-and-or-reverse-engineering-of-any-microsoft-sharepoint-version-is-not-supported.aspx  so you can check the blog entry for more info.

    In order to know what namespaces functions/methods and objects are public and supported in the SPS 2010 and SPS 2013 SDK for the JavaScript object Model, you should check the following links or the SDK:

    SPS 2010 => http://msdn.microsoft.com/en-us/library/ee552096(v=office.14).aspx

    SPS 2013 => http://msdn.microsoft.com/en-us/library/jj193034.aspx

    Kind Regards.

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA

  • Rincón de Héctor Calvarro

    Available December 2012 Cumulative Updates for SharePoint 2010 and MOSS 2007

    • 0 Comments

    Hi

    It is available to download the updates regarding SharePoint 2010 December 2012 CU and MOSS 2007 December 2012 CU

    SharePoint 2010 (Build 14.0.6131.5001)

    (REMEMBER TO INSTALL FIRST SP1)

    After installing the updated you should run the SharePoint Config Wizard in every server of the farm.

    If SPS 2010 installed you must only install the SPS 2010 CU because it includes the Foundation one.

    After installing the updated you should run the SharePoint Config Wizard in every server of the farm.

    After you install this hotfix, you must restart the User Profile Synchronization Service for profile synchronization to function correctly.

    To work around this issue, follow these steps:

    1.Visit Central Administration.
    2.Click Manage Services on the System Settings section.
    3.Find User Profile Synchronization Service in the list of services and then click Stop if its status is Started. Click Start and provide the credentials to start the User Profile Synchronization Service as soon as its status is Stopped.

    For more information, see the Start the User Profile Synchronization service section in the Configure profile synchronization article in the library.

    SharePoint 2007 (Build 12.0.6670.5002)

    Warning! This update will be only install if SP3 is installed in the environment.

    Please, keep in mind that you must install them in the following order first WSS 3.0, and later MOSS 2007.

    After installing the updates you must execute the SharePoint configuration wizard in each of the servers of the farm or execute  “psconfig –cmd upgrade –inplace b2b -wait” on a cmd.

    THX

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA

  • Rincón de Héctor Calvarro

    End of full support WSS 3.0 SP2 & MOSS 2007 SP2

    • 0 Comments

    Hi all.

    I would like to let you know that today ends the full support of WSS 3.0 SP2 and MOSS 2007 including the CUs until WSS 3.0 SP3 and MOSS 2007 SP3.

    So the minimal supported versión is WSS 3.0 SP3 and MOSS SP3

    For more information, please check

    http://support.microsoft.com/lifecycle/default.aspx?LN=en-gb&p1=12200&x=11&y=6

    Thanks.

    Kind Regards.

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA.

  • Rincón de Héctor Calvarro

    PowerShell 3.0, .NET 4.0 & SharePoint 2010

    • 0 Comments

    Good Afternoon

    Probably some of you ,due to any automatic update in your SharePoint 2010 servers, may notice that opening the SP 2010 Management Shell you are prompted with the following messages:

               Error: "The local farm is not accessible. Cmdlets withFeatureDependencyId are not registered."

    Moreover, it turns out executing cmdlets you are having next error:

               "Microsoft SharePoint is not supported with versión 4.0.30319.17929 of the Microsoft .Net Runtime."

    As all we may know SharePoint 2010 is bulit on .NET 3.5 that relies on .NET 2.0. So, as PowerShell 3.0 uses .NET 4.0 , the assemblies compiled on .NET 3.5 of our SharePoint 2010 are not working.

    Then, in order to solve this issue temporally you should modify the shortcut of the start menú of SP 2010 Management Shell and forcé it to use PowerShell 2.0 instead of PowerShell 3.0.

    C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe-NoExit - versión 2.0 "& 'C:\Program archivos de programa\Archivos comunes\Microsoft Shared\Web Server Extensions\14\CONFIG\POWERSHELL\Registration\\sharepoint.ps1'"

    For more information you can check the next KB

             http://support.microsoft.com/kb/2796733/en

    Thanks.

    Kind Regards.

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA.

  • Rincón de Héctor Calvarro

    [Update] Operating Systems supported for SharePoint 2010

    • 0 Comments

    Good morning.

    As an update to the previous post Operating Systems supported for SharePoint 2010 installations.

    http://blogs.msdn.com/b/calvarro/archive/2011/10/26/sistemas-operativos-soportados-para-instalaciones-de-sharepoint-2010-y-requerimientos-m-237-nimos.aspx

    I would like to add:

               - SharePoint 2010 ,until next SP2, it's not supported on any Windows Server 2012 http://support.microsoft.com/kb/2724471/en-us

               - Remember for Windows SBS 2011 installations, as in Windows SBS 2008, It's only supported the version that comes with the operatiing system, SharePoint Foundation 2010.

               - Windows 8 ,as in Windows 7, is only supported for code development installations with all the "Windows features" concerning .NET 3.5 activated and the App pools running in .NET 2.0 mode.

    Thanks

    Kind Regards.

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA.

  • Rincón de Héctor Calvarro

    Available for download SharePoint 2010 October 2012 CU & MOSS 2007 October 2012 CU

    • 0 Comments

    Hi

    It is available to download the updates regarding SharePoint 2010 October 2012 CU and MOSS 2007 October 2012 CU

    SharePoint 2010 (Build 14.0.6129.5003)

    (REMEMBER TO INSTALL FIRST SP1)

    After installing the updated you should run the SharePoint Config Wizard in every server of the farm.

    If SPS 2010 installed you must only install the SPS 2010 CU because it includes the Foundation one.

    After installing the updated you should run the SharePoint Config Wizard in every server of the farm.

    After you install this hotfix, you must restart the User Profile Synchronization Service for profile synchronization to function correctly.

    To work around this issue, follow these steps:

    1.Visit Central Administration.
    2.Click Manage Services on the System Settings section.
    3.Find User Profile Synchronization Service in the list of services and then click Stop if its status is Started. Click Start and provide the credentials to start the User Profile Synchronization Service as soon as its status is Stopped.

    For more information, see the Start the User Profile Synchronization service section in the Configure profile synchronization article in the library.

    SharePoint 2007 (Build 12.0.6668.5000)

    Warning! This update will be only install if SP3 is installed in the environment.

    Please, keep in mind that you must install them in the following order first WSS 3.0, and later MOSS 2007.

    After installing the updates you must execute the SharePoint configuration wizard in each of the servers of the farm or execute  “psconfig –cmd upgrade –inplace b2b -wait” on a cmd.

    THX

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA

  • Rincón de Héctor Calvarro

    Remote Desktop Connection Manager

    • 1 Comments

    Hola

    Un post rápido para una aplicación útil. Remote Desktop Connection Manager nos permitirá manejar varias maquinas virtuales.

     

    La podéis descargar de aquí

    http://www.microsoft.com/en-us/download/details.aspx?id=21101

    Gracias.

    Un saludo.

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA.

  • Rincón de Héctor Calvarro

    MS12-066 - Important Security Hotfix that applies to SharePoint 2010 & MOSS 2007

    • 0 Comments

    Hello.

    As you could notice this morning ,who will have WSUS activated on your servers, the security bulletin MS12-066  http://technet.microsoft.com/en-us/security/bulletin/MS12-066 (KB 2741517) applies to SharePoint 2010 and MOSS 2007. That hotfix fix a vulnerability that allows elevation of privileges. 

    As the hotfix is critical, it will be installed automaticaly. So, after the installation, it's mandatory to execute PSCONFIG on every single server of the farm  => "psconfig –cmd upgrade –inplace b2b -wait" to complete the update process.

    Thank you.

    Kind Regards..

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA.

  • Rincón de Héctor Calvarro

    Life Cycle: WSS 3.0 & MOSS 2007 move to Extended Support.

    • 0 Comments

    Hello

    WSS 3.0 and MOSS 2007 products get into Extended Support from henceforth, as you can read in the following link.

    http://support.microsoft.com/lifecycle/search/default.aspx?sort=PN&alpha=SharePoint+Server+2007&Filter=FilterNO

    Once a product moves into extended support, several changes take place:

    • Request to change product design and features (CDCR's)

    Customer can't ask for CDCR's.

    • Non-Security Fixes

    Customer can ask and get Security fixes. However, ever, non-security hotfixes (RFH) will not be offered unless the customer purchase an Extended Hotfix Support Agreement witin next 90 days.

    • Complementary Support.

    Support also ends for Enterprise Agreement custoemrs-

    • Paid Support.

    This support is still available.

    For more info please check http://support.microsoft.com/gp/lifepolicy  

    Thanks.

    Kind Regards.

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA.

  • Rincón de Héctor Calvarro

    Reflection and/or reverse engineering of any Microsoft SharePoint version is not supported

    • 0 Comments

    Hello.

    How are you?

    Recently, I'm finding on support cases, custom code developed by our customers that are based on some internal SharePoint functionalitities obtained by reserve engineering and/or custom code calls to private/internal SharePoint methods/properties through System.Reflection (What's Reflection?)

    Please, I would like to inform you that those practices are totally unsupported and it's a violation of the EULA  agreed during the installation of the product( Microsoft do not allow them) . For instance, you can watch the terms for SPS 2010

    Besides the previous license terms violation, it could drive your environment to an unstable status or it could create side effects in your environment. Those properties/methods are intended to be used only by SharePoint source code. On the other hand, only the public API properties/methods in MSDN/ any SharePoint SDK version are the supported ones.

    Eventually, you will be prompted to change your code to a supported one and the support case will be set as solved. If the new supported code is affected by the same misfunctionality the investigation will be carry on in a new support case.

    Thanks.

    Kind Regards.

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA

  • Rincón de Héctor Calvarro

    SharePoint 2010, Time outs when creating an application pool.

    • 0 Comments

    Hello

    I faced an interesting case some time ago  that I would like to share with all of  you. One of our customers were expenriencing time outs when creating a web applciation. I collected a memory dump and we foung the following call stack:

    System.Threading.WaitHandle.WaitOne(Int64, Boolean)

    System.Diagnostics.Process.WaitForExit(Int32)

    Microsoft.SharePoint.Administration.SPAdministrationServiceUtilities.RunCommand(System.String,System.String, System.TimeSpan)

    Microsoft.SharePoint.Administration.SPProvisioningAssistant.RegisterAspNetClientFiles()

    Microsoft.SharePoint.Administration.SPWebApplication.Provision()

    Microsoft.SharePoint.ApplicationPages.ExtendVirtualServerPage.BtnSubmit_Click(System.Object,System.EventArgs)

    System.Web.UI.WebControls.Button.OnClick(System.EventArgs)

    System.Web.UI.WebControls.Button.RaisePostBackEvent(System.String)

    System.Web.UI.Page.RaisePostBackEvent(System.Web.UI.IPostBackEventHandler,System.String)

    System.Web.UI.Page.ProcessRequestMain(Boolean, Boolean)

    System.Web.UI.Page.ProcessRequest(Boolean, Boolean)

    System.Web.UI.Page.ProcessRequest()

    System.Web.UI.Page.ProcessRequest(System.Web.HttpContext)

    ASP._admin_extendvs_aspx.ProcessRequest(System.Web.HttpContext)

    System.Web.HttpApplication+CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()

    System.Web.HttpApplication.ExecuteStep(IExecutionStep, Boolean ByRef)

    System.Web.HttpApplication+PipelineStepManager.ResumeSteps(System.Exception)

    System.Web.HttpApplication.BeginProcessRequestNotification(System.Web.HttpContext, System.AsyncCallback)

    System.Web.HttpRuntime.ProcessRequestNotificationPrivate(System.Web.Hosting.IIS7WorkerRequest, System.Web.HttpContext)

    System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr,IntPtr, IntPtr, Int32)

    System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr, IntPtr, IntPtr, Int32)

     

    With not doubts, when the issue happened the provision of the SPWEbApplication was waiting for an external event and because of the method Microsoft.SharePoint.Administration.SPProvisioningAssistant.RegisterAspNetClientFiles() that appears on the top of the stack, it seemed that the culprit was IIS.

    When we inspected the IIS manager. I found a big amount of application pools. As you probably know, SharePoint 2010 only supports10 application pools per WFE http://technet.microsoft.com/en-us/library/cc262787.aspx#WebserverAppServer (FYI MOSS 2007 only supports 8 application pools per WFE)

    However, we applied a simple work around until the customer will reduce the number of application pools. Directly we tuned the shut down time and the ping time to 300 seconds whne a enw IIS application pool will be created.

    I hope this will help you.

    Kind Regards.

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA 

  • Rincón de Héctor Calvarro

    Microsoft Photosynth para Windows Phone 7.5

    • 0 Comments

    Hola

    La semana pasada he descubierto está aplicación de Microsoft para el Windows Phone 7.5 y me ha parecido muy interesante. Te permite generar modelos en 3d por medio de diferentes fotos tomadas con la cámara.

    Como puedes ver en la siguiente imagen vas componiendo el modelo poco a poco con las diferentes imágenes de una forma muy intuitiva. 

    Y la composición final quedaría como veis, donde podéis moveros en 3d hacia cualquier parte de la composición y para ver toda su funcionalidad sólo tenéis que entrar en el siguiente link (Foto propiedad de GigWalked)

             http://photosynth.net/view.aspx?cid=94ee112f-b666-47e7-96c6-199027ee97b6

    La descarga la podéis hacer mediante:

    Para más información os remito a la web oficial y a su blog:

    http://photosynth.net/ 

    http://blogs.msdn.com/b/photosynth/archive/2012/05/29/photosynth-for-windows-phone-is-here.aspx

    Gracias.

    Un saludo.

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA 

  • Rincón de Héctor Calvarro

    Windows Server 2012 RTM Disponibilidad General

    • 0 Comments

    Hola

    Como visteis en el post de horas antes, se ha lanzado la versión RTM de Windows Server 2012.

    Me gustaría apuntaros a los recursos sobre características de producto, descarga de la versión de evaluación etc.

    Página de producto

    http://www.microsoft.com/en-us/server-cloud/windows-server/default.aspx

    Descarga versión de evaluación

    http://technet.microsoft.com/es-es/evalcenter/hh670538.aspx

    Guía de instalación y despliegue de Windows Server 2012

    http://technet.microsoft.com/en-us/library/hh831620

    Un saludo

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA

  • Rincón de Héctor Calvarro

    Presentación Oficial de Windows Server 2012

    • 0 Comments

    Hola

    Hoy a las 8:00 am Pacific Time ,o sea esta tarde a las 17:00, Será la presentación mundial de Windows Server 2012 y podrá ser seguida en la siguiente URL:

    http://www.microsoft.com/en-us/server-cloud/new.aspx

    No te la pierdas!!!

    Además también puedes leer la presentación de producto en el blog de Oficial de Microsoft de mano de Satya Nadella "President, Server & Tools Business, Microsoft"

    http://blogs.technet.com/b/microsoft_blog/archive/2012/08/29/windows-server-2012-is-here-and-so-is-the-cloud-os.aspx

    Saludos.

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA

  • Rincón de Héctor Calvarro

    Available for download SharePoint 2010 August 2012 CU & MOSS 2007 August 2012 CU

    • 0 Comments

    Hi

    It is available to download the updates regarding SharePoint 2010 August 2012 CU and MOSS 2007 August 2012 CU

    SharePoint 2010 (Build 14.0.6126.5000)

    (REMEMBER TO INSTALL BEFORE THE SP1)

    After installing the updated you should run the SharePoint Config Wizard in every server of the farm.

    If SPS 2010 installed you must only install the SPS 2010 CU because it includes the Foundation one.

    After installing the updated you should run the SharePoint Config Wizard in every server of the farm.

    After you install this hotfix, you must restart the User Profile Synchronization Service for profile synchronization to function correctly.

    To work around this issue, follow these steps:

    1.Visit Central Administration.
    2.Click Manage Services on the System Settings section.
    3.Find User Profile Synchronization Service in the list of services and then click Stop if its status is Started. Click Start and provide the credentials to start the User Profile Synchronization Service as soon as its status is Stopped.

    For more information, see the Start the User Profile Synchronization service section in the Configure profile synchronization article in the library.

    SharePoint 2007 (Build 12.0.6665.5000)

    Warning! This update will be only install if SP3 is installed in the environment.

    Please, keep in mind that you must install them in the following order first WSS 3.0, and later MOSS 2007.

    After installing the updates you must execute the SharePoint configuration wizard in each of the servers of the farm or execute  “psconfig –cmd upgrade –inplace b2b -wait” on a cmd.

    THX

    Héctor Calvarro Martín. SharePoint Dev/Core. Microsoft Support Escalation Engineer for EMEA

Page 2 of 6 (135 items) 12345»