Business Connectivity Services (BCS) are a set of services and features that provide a way to connect SharePoint solutions to sources of external data and to define external content types that are based on that external data. The search services in SharePoint 2010 are able to index the external data using the external content type and show meaningful results to the searchers of the external data. BCS is based on its predecessor, Business Data Catalog, with enhancements in several key areas, including support in SharePoint Designer.
This blog is inactive.New blog: EricWhite.com/blogBlog TOCThis is an MSDN article written by Bob McClellan. It will be published sometime in the near future. After it is published, I will update this post to point to that article. This article was driven by Juan Balmori Labra, with technical reviews by Nitin Ved, Josh Teitelbaum, Russell Palmer, Rolando Jimenez, and Juan Balmori Labra.
Step-by-Step Example of Searching External Data
Customizing Search Results
Using Associations for Master/Detail Relationships
Explanation of the BCS Model XML
Modifying the External Content Type to Support Incremental Crawls
Using the Same External Content Type for an External List
This article will examine how to use SharePoint Designer to define an external content type (ECT) and how to set up a search crawl that includes that external data. You will then see how to reduce crawl times for large amounts of data by using incremental crawls. All of this will be done using SharePoint Designer, SharePoint Central Administration and some editing of XML.
Before beginning, you should have the following:
These examples will be more meaningful if you have some general understanding of SQL queries and views. Previous experience with XML will also be helpful. Even without that experience, you should be able to successfully complete all the examples.
In this section, I will show you how to quickly set up a connection to external data using SharePoint Designer to define an external content type (ECT). Then you will see how to configure the search service to index that data and show results in a way that is useful to the end user. The general steps are as follows:
As you work through the specific steps that follow, you will be using four main areas:
I suggest that once you have started working in one of those areas that you keep that window open. For example, once you have a window open for Business Data Connectivity, open a new window to configure the search service.
The first step is to verify that the web application has a connection to the necessary services. If any necessary services are not connected, you must connect them.
The next step is to configure the Business Data Connectivity Service. You will need to set the permissions and set a host site for profile pages. Profile pages are used to show the detailed information about an external data record. The search service will link its results to the appropriate profile page. If you do not set up a profile page, then the search results will contain a useless link. Each profile page will show the data for a particular external content type, so you need a different page for each type. You could host these pages on any site, but it is usually better to create a separate site, or even a separate site collection for those pages so that they are not stored with regular site content. These instructions will show how to create the site within an existing site collection.
The URL that you see is the one you will use for the next step. For example, if the URL for the profile page site is "http://server1/ProfilePages/default.aspx" then you will specify the location of the profile pages as "http://server1/ProfilePages" as the host URL.
You must also create a simple search site for testing.
Next, you will create an external content type (ECT) for the product and description view in the AdventureWorks database. The ECT can be created in the root of the site collection or any of the sites in that collection, including the one you just created. The ECT will be connected to SQL Server as an external system. Then you will define two basic operations to make the ECT usable by the search service. The Read List operation is used to get the full list of records from the ECT. The Read Item operation is used to get a specific record from the ECT. Both operations require that you specify the field that uniquely identifies each record.
Toward the end of creating the ECT, you set the field that will be used as the title. That is the value that will appear as the link in the search results. If you don't specify a title, the search results will show cryptic text as the title that is likely to be confusing to the end user.
Now you need to configure the search service to use this ECT while crawling and indexing. The search service uses Content Sources to identify and control the content it needs to search. You will also need to set the account to use for the crawl operation. This account should be the same as the one you used to set permissions in the Business Data Connectivity service and it must have read access to the AdventureWorks database.
Note: In a production configuration, a new account should be created and used only to control permissions for the search service.
The search service is now crawling through the new data to create search indexes for that content. It should be done in a few minutes, but if this view had millions of records, the crawl would take significantly longer. You can click on the Refresh link to update the status. When the status is "Idle," the search crawl is done.
Now you have a basic search working with external data. Next you will see how to control the appearance of the profile page and the results of the search.
There are two simple modifications you can make to the search using SharePoint Designer. First, you can change the fields that appear on the profile page and their descriptions by modifying the Read Item operation. For example, the descriptions "ProductID" and "ProductModel" are not particularly user-friendly. Also, the CultureID field is not particularly useful.
If you have kept SharePoint Designer open, you can skip the first two steps below.
You can test the results by going to the search site and looking at one of the profile pages. This change was only to the profile page, so there is no need to perform another crawl. Obviously, the changes you can make through the ECT are limited. If you want more advanced customizations, you can edit the page directly and change it as you wish. (For example, you cannot remove the identifier field from the operation, but you could remove it from the profile page manually.) Be aware that if you ever create that profile page from the ECT later, it will overwrite those direct changes.
Figure 14. Modified profile page
The second change you can make is to adjust the Read List operation to exclude some fields from the search indexing. In this step, you will remove the description from the indexing. Before you start that step, try a search for the word "microfiber." You should get some matches on that word in the descriptions. Now you will remove the Description field from the Read List operation and see that it is no longer indexed.
The ECT has been changed, but now the search index needs to be updated by running a full crawl. Whenever you modify an ECT, its internal ID is changed. The content source needs to be recreated, otherwise it will get errors trying to find that old ID.
When the crawl is complete, go back to the search site and try searching for "microfiber" again. There will now be no matches. You can still search for "Jersey" and click on one of the "Long-Sleeve Logo Jersey" items to see that the description with the word "microfiber" can be viewed in the profile page, but it has now been excluded from the search results.
Business Connectivity Services also allows you to define a master/detail (aka parent-child) relationship between two ECTs. The resulting profile page for the master ECT will automatically be generated with a list of the detail records for that particular master record. Our interest here is how the search service handles this type of association.
To try this out, you will create an association from the detail ECT (Product) to the master ECT (ProductModel). Then you will create a new content source in the search to see how the results are generated for those. Then you will see how to modify the configuration to give a much simpler and more useful set of results by treating the detail records as attachments to the master record.
You probably noticed that I had you create a new named connection for the same AdventureWorks database. The reason is that a content source in the search will crawl all ECTs defined with the same data source. If you want to be able to completely control when those different ECTs are crawled and how they are crawled, you will need to create different data sources so that you can also create different content sources for search.
You may also have noticed that you did not have to set the identifiers for these ECTs. SharePoint Designer automatically detects the primary key field for tables, but not for views.
The associated ECTs are ready. Now you need to create a new search content source to index them. It also helps to delete the old content source, so that you can see the results of the new indexing only.
When the crawl is done (click Refresh to update the status), you can search for "Jersey" and you will see results for both the Master (Model) and Detail (Product). The model results do not have sizes (e.g. S, M, L) and the link for them includes the words "ProductModel" instead of "ProductDetail." Click on one of those and you will see the master/detail view that is created by the association. Although this search works, it isn't pretty and the search is not indexing information in the detail. You can see matches for the detail, but they are not based on the master record. For example, if you search for "Dissolver," you will only see the detail in the results. To make these results better, you will first eliminate the detail records from the search, then modify the ECT to "attach" the detail record information to the master record. The first change is one you have already done before, but now you will remove all the fields that can be indexed.
Figure 17. Profile Page for a Master/Detail Association
If you have left the tabs open for the ECTs you just defined, skip the first two steps.
Follow the usual steps to run a full crawl after changing the model. Remember to delete the existing content source and then create a new one. Now when you search for "Dissolver," there should be no results. You will now modify the model so that the associated data is attached to the master during search indexing. This change is not supported by SharePoint Designer, so you will need to modify the model in its XML form. To do so, you will need to export the model to an XML file, edit it and then import the changed file.
You can use any XML editor to change this file. I use SharePoint Designer by finding the file in a file browser and then selecting Edit with Microsoft SharePoint Designer from the right-click popup menu. You could also drag the file into SharePoint Designer or even edit it with Notepad.
Modify the XML file to add the highlighted line shown below. Be sure you are in the MethodInstances element for the association rather than the ones for the Read List or Read Item methods.
<MethodInstances> <Association Name="ProductNavigate Association" Type="AssociationNavigator" ReturnParameterName="ProductNavigate Association" DefaultDisplayName="Products"> <Properties> <Property Name="AttachmentAccessor" Type="System.String"></Property> <Property Name="ForeignFieldMappings" ...> </Properties>
Save the change and then follow the steps below to import the model with the change.
Note: When you exported the model, you chose a name for it that also happens to be the same as the External Content Type. Although the model and ECT may seem like the same thing, they are not. If you had to import that same model file again, you would get an error saying that there is a duplicate model, even if you had deleted the ECT. Whenever you are importing the same model a second time, you must delete the model instead of the ECT to avoid that error.
Follow the usual steps to recreate the AWModelSearch content source and run a full crawl. Now when you search for" Dissolver," you should get the desired results. You can also try searching for "Jersey" and see that it only returns the shows the model records in the results.
You made a modification to the XML version of the BCS Model in the last section. This section will explain most of the elements of that XML file. Feel free to skip down to the next section about incremental crawls, if you are not that interested in these details. This information is not necessary to complete the examples. It will help if you are looking at an actual model XML file while reading through this.
The top-level element is the Model. It has a Name attribute that will appear as the name of the model when you import it. LobSystems is a child of Model. It may contain one or more LobSystem child elements. The LobSystem element has a Name attribute that is used to easily identify the external data source. It also has a Type attribute for the type of data source. For these examples, the Type is "Database."
The actual connection information for that data source is defined as Property elements in the LobSystemInstance element, which is a child of LobSystemInstances. LobSystemInstances is a child of LobSystem. Property elements are very common in the BCS Model. Many of the elements allow a Properties element that contains one or more Property elements. A Property element has a Name attribute that identifies the property and a Type attribute that identifies the .Net type of the value for that property. The value then appears in the body of that Property element. Some of the property names for LobSystemInstance are shown in the table below.
Table 1. Properties for LobSystemInstance
RdbConnection Data Source
RdbConnection Initial Catalog
RdbConnection Integrated Security
You might have noticed that all the properties that start with "RdbConnection" are regular connection string values for an SQL database. Any value that appears in a connection string can defined in this list of properties by prefixing it with "RdbConnection." The last property listed, ShowInSearchUI, doesn't have value. Even though it is defined as a string, just having the property is all that is needed for the model to know that the LobSystemInstance should appear in the user interface.
Another child of LobSystem is Entities. Although it may contain one or more Entity children, you will generally see models with just one entity. The Entity is equivalent to a single External Content Type. There are several attributes for an Entity, including the Name and the DefaultDisplayName. The properties for an Entity element are shown in the table below.
Table 2. Properties for Entity
The Title property defines the field that will be used as the title in the search results. The DefaultAction property refers to an Action element by name. That action will be used as the link from the search results. In these examples, that action is always set to open a URL for a profile page.
Some child elements for an Entity are AccessControlList, Identifiers, AssociationGroups, Actions and Methods.
The AccessControlList element may contain one or more AccessControlEntry elements that have a Principal attribute with the user name that will be given access. The child elements are Right elements that define the access rights for the principal. Each Right element has a BdcRight attribute that can be Edit, Execute, SetPermissions or SelectableInClients.
The Identifiers element contains an Identifier element with a Name attribute for the field name that is an identifier for the entity and a TypeName attribute that contains the .Net data type of the identifier.
The AssociationGroups element is used to define associations between ECTs. The Actions element contains an Action element, usually to open a profile page. These are easily defined by SharePoint Designer, so I won't say much about them here.
The Methods element contains one or more Method elements. Each Method element has a Name attribute that uniquely identifies the method for this entity. It also has an AccessControlList element that is identical to the one in the Entity element. The properties for a Method element are shown in the table below.
Table 3. Properties for Model
SELECT [ProductID], [ProductModelID] FROM [Production].[Product]
The RdbCommandText is very important since it allows you to greatly customize the SQL query used for your data. For example, if you don't have the ability to create a view on a particular database, you could still modify that text to do joins within the command text as long as the return parameters matched. The BackEndObjectType can be SqlServerView if the RdbCommandText refers to a view instead of table.
FilterDescriptors is a child of the Method element. It may contain one or more FilterDescriptor elements. SharePoint Designer supports the creation of filters in its user interface, but they are not generally that useful for search methods where you have control over the SQL query. There is one filter, SynchronizationCookie, that will be shown in the next section.
Parameters is a child of the Method element. It may contain one or more Parameter child elements. The Parameter element has a Name attribute that uniquely identifies the parameter and Type attribute that can be In, InOut or Return. There can only be a single parameter for each Method that is a Return type. The number and types of parameters are determined by the operation that the method implements. Many of these operations can be defined by SharePoint Designer, so it is easiest to create the operation there and then edit as necessary. Two of the operations that cannot be defined by SharePoint Designer, ChangedIdEnumerator and DeletedIdEnumerator, will be defined in the next section.
The parameter is actually defined by the child TypeDescriptor element. This element has attributes for the Name, TypeName, and IdentifierName. Some elements have simple types and are defined by a single TypeDescriptor element. Others can be very complex with nested TypeDescriptors and TypeDescriptor elements and additional properties. Some of the properties for the TypeDescriptor element are shown below.
Table 4. Properties for TypeDescriptor
For the most part, you should be able to copy and edit the parameters that are defined by SharePoint Designer.
The last important child of the Method element is MethodInstances. It contains a MethodInstance element that defines the type of operation. The Type attribute may be Finder, SpecificFinder, AssociationNavigator, IdEnumerator and others. The ReturnParameterName attribute must refer to the name of the attribute that defines the return value for the operation. The Default attribute will usually be "true" since you will only define one method for each operation. If there were more than one Finder, for example, this would specify which one would be used by default. The Name attribute identifies the MethodInstance and the DefaultDisplayName will be used whenever that operation name is displayed. The MethodInstance element has some important properties as shown in the table below.
Table 5. Properties for TypeDescriptor
The RootFinder marks the Finder method that the search crawler will use to enumerate all of the top level rows that should be crawled. There should be only one Finder method that is marked as the RootFinder. The AttachmentAccessor property was discussed in the previous section and the LastModifiedTimeStampField property is discussed in the next section.
If you want to see more documentation of the BCS Model, see the links in the Additional Resources section.
It's easy enough to run full crawls all the time for the numbers of records in these examples, but it doesn't work so well if you want to index a million records. Once the ECT and search is set up for that kind of volume, it is much better to run incremental crawls to find any changes since the last crawl and then update just those in the search index. SharePoint search supports two approaches for handling incremental crawls on external content types. There are advantages and disadvantages to each, but first you need to understand how they function.
In this approach, you define a field that contains the last modified timestamp for each record. If that timestamp is newer than the last crawl, then the indexes for that record are updated. For this example, you will be modifying the ECT based on a view, but first you will need to add the last modified date to the view in the AdventureWorks database.
ALTER VIEW [Production].[vProductAndDescription] WITH SCHEMABINDING AS SELECT p.[ProductID] ,p.[Name] ,pm.[Name] AS [ProductModel] ,pmx.[CultureID] ,pd.[Description] ,CASE WHEN p.ModifiedDate > pm.ModifiedDate THEN p.ModifiedDate ELSE pm.ModifiedDate END AS ModifiedDateFROM [Production].[Product] p INNER JOIN [Production].[ProductModel] pm ON p.[ProductModelID] = pm.[ProductModelID] INNER JOIN [Production].[ProductModelProductDescriptionCulture] pmx ON pm.[ProductModelID] = pmx.[ProductModelID] INNER JOIN [Production].[ProductDescription] pd ON pmx.[ProductDescriptionID] = pd.[ProductDescriptionID];
This adds one new field to the view. For this example, the ModifiedDate is the most recent modified date from Product or ProductModel. If you also wanted to include ProductDescription in that expression, you would just need to add another case to determine which of the dates is most recent.
By checking the box for the Timestamp Field, you have set that field to be used by the search service to determine if the record has changed since the last crawl. Internally, the XML will now have a LastModifiedTimeStampField property that specifies the ModifiedDate field. If you exported the model for Products and searched for the property, you would find it in the MethodInstances properties for the Read List method.
You can now follow the usual steps to create the AWProductSearch content source and run a full crawl. As before, you may want to delete the AWModelSearch to avoid seeing results from both sources. When the full crawl is done, start an incremental crawl. When the incremental crawl has completed, you can now see if it worked.
You should see that the full crawl had something like 296 successes and the incremental crawl had only 2 successes. Since no records had changed, the incremental crawl did not have to re-index the records.
If you want to test the modified date, make a change to one or more of the records that includes updating the ModifiedDate field to the current date/time and then run another incremental crawl. The successes will be higher than 2 (3 if you change just one record), but not nearly as high as 296. The query below shows an example of that sort of change.
UPDATE Production.ProductSET Name='Classical Vest, M',ModifiedDate=GETDATE()WHERE ProductID=865
In this approach, SharePoint search stores a token or cookie that we designate to track changes since the last crawl. In this case, the cookie will be a single timestamp from the last time that a crawl was started. If there have been any changes since that time, then only the modifications are updated in the index. This process requires two new operations to be defined for the ECT, one for changed records and one for deleted records. These must be created manually because SharePoint Designer does not have a way to create them. (If you look at the ECT in SharePoint Designer, they will be shown in the External Content Type Operations list, but you will not be able to edit them.) As before, you will need to export the BCS model in order to edit the XML directly.
In order to implement these two operations, you will need two SQL queries. One will return the records changed after a particular timestamp and the other will return the records deleted after a particular timestamp. For the product table, I will use the DiscontinuedDate to indicate that a record has been effectively deleted and should no longer appear in search results. If the DiscontinueDate field is null, it is still active. The DiscontinuedDate from the Product table will need to be added to the view just like the ModifiedDate was added previously, though there is no need to look at the ProductModel record, so it's a simple added field (p.DiscontinuedDate).
Here are the new methods that you will need to add to the BCS model for the Products ECT within the Methods element. They both use a SynchronizationCookie filter type to track the last run date and time. The SQL query must return the appropriate set of changed or deleted record IDs and also update the last run date and time. The key SQL is highlighted in the XML for these two operations below.
<Method IsStatic="false" Name="GetChangedProductIds"> <Properties> <Property Name="RdbCommandType" Type="System.Data.CommandType, System.Data, Version=126.96.36.199, Culture=neutral, PublicKeyToken=b77a5c561934e089">Text</Property> <Property Name="RdbCommandText" Type="System.String">if @LastRunDate != CAST('1900-1-1' as datetime)BEGIN SELECT [ProductID] FROM [Production].[vProductAndDescription] WHERE [ModifiedDate] > @LastRunDateENDSET @LastRunDate=CURRENT_TIMESTAMP </Property> <Property Name="BackEndObjectType" Type="System.String">SqlServerView</Property> <Property Name="BackEndObject" Type="System.String">vProductAndDescription</Property> <Property Name="Schema" Type="System.String">Production</Property> </Properties> <AccessControlList> <AccessControlEntry Principal="contoso\administrator"> <Right BdcRight="Edit" /> <Right BdcRight="Execute" /> <Right BdcRight="SetPermissions" /> <Right BdcRight="SelectableInClients" /> </AccessControlEntry> </AccessControlList> <FilterDescriptors> <FilterDescriptor Name="LastRunDate" Type="InputOutput"> <Properties> <Property Name="SynchronizationCookie" Type="System.String">ChangedItemCookie</Property> </Properties> </FilterDescriptor> <FilterDescriptor Name="FilterDescriptor" Type="Timestamp" /> </FilterDescriptors> <Parameters> <Parameter Name="@LastRunDate" Direction="InOut"> <TypeDescriptor Name="LastRunDateTypeDescriptor" TypeName="System.DateTime" AssociatedFilter="LastRunDate"> <Interpretation> <NormalizeDateTime LobDateTimeMode="Local" /> </Interpretation> </TypeDescriptor> </Parameter> <Parameter Direction="Return" Name="ChangedProductIds"> <TypeDescriptor TypeName="System.Data.IDataReader, System.Data, Version=188.8.131.52, Culture=neutral, PublicKeyToken=b77a5c561934e089" IsCollection="true" Name="ChangedProductIds"> <TypeDescriptors> <TypeDescriptor TypeName="System.Data.IDataRecord, System.Data, Version=184.108.40.206, Culture=neutral, PublicKeyToken=b77a5c561934e089" Name="ChangedProductIdElement"> <TypeDescriptors> <TypeDescriptor TypeName="System.Int32" ReadOnly="true" IdentifierName="ProductID" Name="ProductID"> <Properties> <Property Name="RequiredInForms" Type="System.Boolean">true</Property> </Properties> </TypeDescriptor> </TypeDescriptors> </TypeDescriptor> </TypeDescriptors> </TypeDescriptor> </Parameter> </Parameters> <MethodInstances> <MethodInstance Name="GetChangedPrimaryKeysInstance" Type="ChangedIdEnumerator" ReturnParameterName="ChangedProductIds" /> </MethodInstances></Method><Method IsStatic="false" Name="GetDeletedProductIds"> <Properties> <Property Name="RdbCommandType" Type="System.Data.CommandType, System.Data, Version=220.127.116.11, Culture=neutral, PublicKeyToken=b77a5c561934e089">Text</Property> <Property Name="RdbCommandText" Type="System.String">if @LastRunDate != CAST('1900-1-1' as datetime)BEGIN SELECT [ProductID] FROM [Production].[vProductAndDescription] WHERE [DiscontinuedDate] > @LastRunDateENDSET @LastRunDate=CURRENT_TIMESTAMP </Property> <Property Name="BackEndObjectType" Type="System.String">SqlServerView</Property> <Property Name="BackEndObject" Type="System.String">vProductAndDescription</Property> <Property Name="Schema" Type="System.String">Production</Property> </Properties> <AccessControlList> <AccessControlEntry Principal="contoso\administrator"> <Right BdcRight="Edit" /> <Right BdcRight="Execute" /> <Right BdcRight="SetPermissions" /> <Right BdcRight="SelectableInClients" /> </AccessControlEntry> </AccessControlList> <FilterDescriptors> <FilterDescriptor Name="LastRunDate" Type="InputOutput"> <Properties> <Property Name="SynchronizationCookie" Type="System.String">DeletedItemCookie</Property> </Properties> </FilterDescriptor> <FilterDescriptor Name="FilterDescriptor" Type="Timestamp" /> </FilterDescriptors> <Parameters> <Parameter Name="@LastRunDate" Direction="InOut"> <TypeDescriptor Name="LastRunDateTypeDescriptor" TypeName="System.DateTime" AssociatedFilter="LastRunDate"> <Interpretation> <NormalizeDateTime LobDateTimeMode="Local" /> </Interpretation> </TypeDescriptor> </Parameter> <Parameter Direction="Return" Name="DeletedProductIds"> <TypeDescriptor TypeName="System.Data.IDataReader, System.Data, Version=18.104.22.168, Culture=neutral, PublicKeyToken=b77a5c561934e089" IsCollection="true" Name="DeletedProductIds"> <TypeDescriptors> <TypeDescriptor TypeName="System.Data.IDataRecord, System.Data, Version=22.214.171.124, Culture=neutral, PublicKeyToken=b77a5c561934e089" Name="DeletedProductIdElement"> <TypeDescriptors> <TypeDescriptor TypeName="System.Int32" ReadOnly="true" IdentifierName="ProductID" Name="ProductID"> <Properties> <Property Name="RequiredInForms" Type="System.Boolean">true</Property> </Properties> </TypeDescriptor> </TypeDescriptors> </TypeDescriptor> </TypeDescriptors> </TypeDescriptor> </Parameter> </Parameters> <MethodInstances> <MethodInstance Name="GetDeletedPrimaryKeysInstance" Type="DeletedIdEnumerator" ReturnParameterName="DeletedProductIds" /> </MethodInstances></Method>
Although these methods appear very long, they are actually pretty simple and similar. The filter is defined to pass in the last run date, though it is really a timestamp containing both date and time. The return parameter is defined as a set of records containing just a ProductID. The MethodInstance elements define these methods as the changed record and deleted record operations.
The SQL code is also similar. Both check to see if the "LastRunDate" timestamp is valid. If so, they return all the modifications since that date and time. Then the timestamp is updated to the current date and time so that the cookie will be stored with the new value. The changed record method compares the ModificationDate to the last timestamp and the deleted record method compares the DiscontinuedDate.
There is one other change that should be made to correctly implement this approach. The SQL for the Read List operation should be updated to be sure that no deleted records will be included in a full crawl, as shown below.
<Property Name="RdbCommandText" Type="System.String">SELECT [ProductID],[Name],[ProductModel],[CultureID],[Description]FROM [Production].[vProductAndDescription]WHERE [DiscontinuedDate] IS NULL</Property>
Make these changes to the Products model, and you might also want to remove the LastModifiedTimeStampField property to verify that the new methods are doing the job. Import the modified model using the BDC service configuration in SharePoint Central Administration.
Now you can try it out by recreating the content source for search and then making changes to the records, starting the incremental crawl and searching to see the results.
If the database really needs to delete records, rather than just mark them as "deleted," you will need to use another approach to keep track of deletions. The easiest is to create a new table for deleted IDs and add a trigger to the original table that adds records to the new table whenever they are deleted. The table of deleted records could store just IDs and a timestamp. If your incremental crawls are run on a schedule, then you could also schedule a SQL job to delete older records from the table.
The timestamp-based approach is much simpler to implement, but the changelog-based approach is much more efficient. The timestamp-based approach requires that the search service to store the timestamps for every record and then compare them all every time it does an incremental crawl. The changelog-based approach only requires the search service to store a single timestamp. In addition, when the search service requests the changes, it only processes the records that have changed. If you have a very large number of records, then the changelog-based approach will save a lot of time and storage. If you have very few records, then the incremental crawls aren't really necessary. If you aren't sure which approach to use, you can try the timestamp-based approach first. Then, if it seems to be too slow or be taking too much disk storage, try switching to the changelog-based approach. However, if you do not have any control over the database, you may be forced to use the approach that works with the existing schema.
If you have used SharePoint search with external data since the Business Data Catalog was introduced in SharePoint 2007, you would have used IDEnumerator instead of the Read List operation. The IDEnumerator method still works for searches, but it is not supported directly in SharePoint Designer. One of the uses of IDEnumerator was also to allow for very large external lists that otherwise would be throttled by the site settings. The search crawlers are not constrained by the throttle settings, so there is no need to use "segmenting" techniques. If you already have an ECT with IDEnumerator defined, you can use it for search as well. For new ECT definitions, it is quicker to use the Read List operation in SharePoint Designer.
The use of ECTs for external lists is not really within the scope of this paper, but you might be tempted to use the same ECTs for both. Just remember that many of the customizations for search could also affect the appearance of the external list. Also, you could easily have to deal with throttling limits that could interfere with the efficiency of the search crawls. In general, it is probably better to use different ECTs for these purposes unless your data is very simple and less than a thousand records.
For more information, see the following resources:
Enterprise Search administration
Business Data Connectivity services administration
Business Connectivity Services Schema Reference
Stereotyped Operations Supported By BDC
The Notion of Associations and the External Item Picker
Tooling Associations in SharePoint Designer 2010
Configure the Secure Store Service (SharePoint Server 2010)
This is a great post - 10X for that
One thinkg, what about LOB permissions. Let's say the LOB system managed it's own permissions how can we keep it in the search results?
For example let's say that teh products in you example are not available for everyone and the permissions managed in SQL tables, how can we keep that?
For those trying to get the ChangedIdEnumerator method to work, you can stop pulling your hair. ChangedIdEnumerator methods don't work in SP 2010 nor in SP 2010 SP1. This is due to a bug in the search connector framework. You'll get an error "Object reference not set to an instance of an object" in the crawl log when running an incremental crawl with some updated items.
I'd be happy to report the bug if there was an easy way to report bugs to Microsoft.
Thank you for this good article. It would be even better if this information was actually usable.
My requirement is to search the data which is present in sql database and modify the data. I am able to search the data. Data which is present in the profile page is readonly. Could you please help me how to edit the data.
Hai it is good and helpful for me.I fallow the same as mention the above Line of Business data but i am crawling the LOB i am getting the Error that is Error while crawling LOB contents. ( Access denied by Business Data Connectivity. )
if we know any one how to rectify this error.Please share me any information available to this post .
thank you for the great post.
I am writing a custom indexing connector and have the problem, that ChangedIdEnumerator and DeletedIdEnumerator methods are not called with custom connector.
I have tried the .NET connector with ChangedIdEnumerator/DeletedIdEnumerator and it works wonderful.
But I need custom connector with changelog incremental crawl, because our external system doesn't have static interfaces and where are millions of items to index.
Have you ever tried to write something like that?
No doubt how good is this post is. Thanks for sharing it.
Jobs in LA County is a place to help potential employees submit resumes and find local Jobs in LA County.
Just to confirm, Will the steps change if i want to search BLOB using FAST SEARCH?
Please let me know.
This post is most helpful thank you! Many other articles online do a very poor job of explaining how to configure incremental crawls and this section - in particular the comparison of the timestamp-based and changelog-based approach - was most useful.
One small question I have regarding the changelog approach: What timezone will the CURRENT_TIMESTAMP value be in? This obviously doesn't impact imcremental crawls that aren't very frequent but could have an affect if they are set up to be hourly or more frequently. Or is it assumed that ModifiedDate and DiscontinuedDate columns are timestamp rather than DateTime SQL types? (If the columns are timestamps then they must belong to different database tables since SQL Server only allows each table to have a single timestamp column).