Service Engineer, Microsoft Visual Studio Online - Team Foundation Server
Update Dec 10: Visual Studio will expire on Jan 1 2009. You will need to disable time synchronization before then if you want to continue using it without re-downloading.
It’s been a week since we released (and then re-released) the Visual Studio 2010 and .NET Framework 4.0 CTP to the web and PDC2008 attendees.
The goal of the Community Technology Preview is to obtain feedback from our customers on the new scenarios we have enabled. We have defined step by step walkthroughs to help them discover these new scenarios. You are encouraged to set up the CTP and engage directly in a conversation regarding each walkthrough with the team working on that scenario in a forum thread. You can learn more about the CTP and engage in a conversation with the team from here: http://go.microsoft.com/fwlink/?LinkId=129231
You can download the VPC from here. It’s quite a large download at 7.11GB and I suggest you follow Brian Keller’s post on a more reliable and faster download experience.
The purpose of this post is to show you that it is possible to run the CTP under Hyper-V. This can yield better performance depending on your hardware configuration.
This is my personal setup, and I can say that it runs quite well. Your mileage may vary. Remember that this is a preview release and we’ve not yet gone through a performance optimization phase yet.
Once you download the 11 RAR files at 7.11Gb and extract them, you should have two files:
The first step is to open Hyper-V Manager on Windows 2008 and go to Action > New > Virtual Machine…, you will then be taken through the wizard of setting up a new guest virtual machine.
If you have a second hard-drive, you’ll want to move the .vhd and store the virtual machine on that drive. I recommend something like the WD 10K RPM VelociRaptor.
Although the Virtual PC comes configured for 1Gb of memory, I suggest that you give it at least 2Gb for the best performance. The image contains a 32-bit version of Windows 2008, so giving it more than 3.5Gb is not worthwhile.
The next screen asks you to configure networking. I strongly suggest that you don’t connect this image to the network. Among other things (Virus protection, etc), if you have two machines on the network with the same machine name (which you cannot change in this CTP), then they will get confused and try and talk to each other.
Now you need to attach to the existing .vhd that you extracted from the RAR files download.
On the summary screen, you’ll want to uncheck ‘Start the virtual machine after it is created’. This is so that we can create an initial snapshot before we’ve done anything to the VHD.
Once you’ve created a snapshot using Hyper-V Manager and started the VPC, it will look something like this:
The first step is to open up Control Panel > Programs and Features > Virtual Machine Additions > Uninstall
Before rebooting, we’ll enable the ‘Detect HAL’ option in the boot configuration. This option is necessary, otherwise none of the Hyper-V services will start once they are installed later on. See MSDN: The VMBus device does not load on a virtual machine that is running on a Windows Server 2008-based computer that has Hyper-V installed, for more information.
Go to Start > Run > msconfig.exe > Advanced Options… > Detect HAL. Shutdown the virtual machine.
(Optional) Once the virtual machine has shut down, open the Hyper-V session Settings, click ‘Processor’ and change the “Number of logical processors” from 1 to X (where X is the number of cores on your box)
Once you reboot, you will need to install the Hyper-V Integration Services. To do this, select Action > Insert Integration Services Setup Disk from the Hyper-V console.
You will be prompted that a previous installation has been detected, press OK.
The installation should proceed. Reboot when the installation is complete.
Once the machine reboots and you logon to it, you should see Windows installing new hardware drivers. Once all these complete, restart the machine.
Once the machine reboots, start Visual Studio and confirm that everything is working and that Team Explorer connects to TFS correctly.
You’ll now need to install your own copy of Excel if you want to use the TFS/office integration components.
If everything seems to be working, create a snapshot of your freshly converted Hyper-V VM. This will allow you to revert back to this snapshot at any time.
If you have any problems with these steps, please leave a comment and/or start a thread on the VS2010 CTP discussion forums.
Nice guide. I just missed the HAL step. Now everything works fine.
This week, in conjunction with PDC 2008 , we are releasing the first Community Technology Preview of
Last week, we posted about the availability of the Visual Studio 2010 and .NET Framework 4.0 CTP , which
Grant has created an excellent and detailed blog post on the steps you should follow to run the CTP on
The Accentient Blog on 2010 Feature Preview for TFS: VSTS 2010 Ayman Badawi on Visual Studio 2010 and...
If I may add: After the Detect HAL checkbox step, when the VPC is “off” for the reboot:
In the Hyper-V session Settings, click ‘Processor’ and change the “Number of logical processors” from 1 to X (where X is the number of cores on your box ;-).
For those of you running Windows Server 2008 with Hyper-V and have downloaded the VS2010 CTP VPC, Grant
I've seen people run into some issues doing this and one of the guys on our team wrote a good blog post
Today we published a new CTP Virtual PC image of Visual Studio 2010 . I hope you enjoy this pre-release
In a previous blog post, I explained the steps to convert the VS2010 CTP VPC from Virtual PC to Hyper-V
Parallel Programming and the Virtual PC limitation
Nice post, but I cannot get the vs2010 ctp started - I keep getting this error:
I have a turion x2 and even tested to make sure it has hardware virtualization and even dep and it tested fine. In addition there is no bios setting to manually turn on virtualization in my setup
Any thoughts or should I just use VPC
For those of you folks who have converted the VSTS 2010 CTP ( see Grant's post ) to take advantage of
If you’ve been using the Team System 2010 Community Tech Preview VPC , you’ve probably noticed that the
If you are running the Visual Studio 2010 and .NET Framework 4.0 CTP under Virtual PC or Hyper-V, you