Karthick PK 's Blog

Karthick PK's technical blog covering topics such as SQLServer troubleshooting, technologies and security.

Non-yielding IOCP Listener, Non-yielding Scheduler and non-yielding resource monitor known issues and fixes

Non-yielding IOCP Listener, Non-yielding Scheduler and non-yielding resource monitor known issues and fixes

Rate This
  • Comments 10

 

Do you see below errors in SQL error along with dumps and stuck?

New version of this post in available in This Link

 

Non-yielding IOCP Listener
* BEGIN STACK DUMP:
*   05/06/12 03:54:59 spid 0
* Non-yielding IOCP Listener

Non-yielding Scheduler
* BEGIN STACK DUMP:
*   04/16/12 10:09:58 spid 6256
* Non-yielding Scheduler

Non-yielding Resource Monitor

* BEGIN STACK DUMP

*   01/22/09 19:11:16 spid 0

* Non-yielding Resource Monitor

 

Refer How to analyze Non-Yielding scheduler or Non-yielding IOCP Listener dumps  for analyzing the Non-yielding Scheduler, Non-yielding IOCP Listener and Non-yielding Resource Monitor

If you are interested in just finding a quick resolution follow the below steps to get the Non-Yield stack from the dump and check if it is matching with any existing known issues in SQL Server. 

To analyze the dump download and Install Windows Debugger from This  link

1. Open Windbg

2. Choose File menu –> select Open crash dump –>Select the Dump file (SQLDump000#.mdmp)

3. on command window type    
.sympath srv*c:\Websymbols*http://msdl.microsoft.com/download/symbols;

4. Type .reload /f and hit enter. This will force debugger to immediately load all the symbols.

5. Type  .cxr sqlservr!g_copiedStackInfo+0X20   for SQL Server2005 and SQL Server2008/2008R2  (or)   .cxr sqlmin!g_copiedStackInfo+0X20  for SQL Server2012.

Type kc 100 and look at the stack to see if it matches with the stack of any of known issues in SQL Server listed below.

If kc 100 doesn’t display any stack and throws “WARNING: Frame IP not in any known module. Following frames may be wrong”  type .cxr to reset to default scope and try  .cxr sqlservr!g_copiedStackInfo+0X00c (In 32-Bit (X86)  SQL server valid offset for context is 0X00c Look at This blog to see how we identified the offset)   

6.  Type kc 100 and look at the stack to see if it matches with any of the known issues in SQL Server.

 

Stack 1

sqlservr!COptExpr::DetachPointersIntoMemo

sqlservr!COptExpr::DetachPointersIntoMemo

sqlservr!COptExpr::DetachPointersIntoMemo

sqlservr!COptExpr::DetachPointersIntoMemo

sqlservr!COptContext::PcxteOptimizeQuery

sqlservr!CQuery::Optimize

sqlservr!CQuery::PqoBuild

sqlservr!CStmtQuery::InitQuery

sqlservr!CStmtDML::InitNormal

sqlservr!CStmtDML::Init

sqlservr!CCompPlan::FCompileStep

sqlservr!CSQLSource::FCompile

sqlservr!CSQLSource::FCompWrapper

sqlservr!CSQLSource::Transform

sqlservr!CSQLSource::Execute

sqlservr!ExecuteSql

sqlservr!CSpecProc::ExecuteSpecial

sqlservr!CXProc::Execute

sqlservr!CSQLSource::Execute

sqlservr!CStmtExecProc::XretLocalExec

sqlservr!CStmtExecProc::XretExecExecute

sqlservr!CXStmtExecProc::XretExecute

sqlservr!CMsqlExecContext::ExecuteStmts<1,1>

sqlservr!CMsqlExecContext::FExecute

sqlservr!CSQLSource::Execute

sqlservr!process_request

sqlservr!process_commands

sqlservr!SOS_Task::Param::Execute

sqlservr!SOS_Scheduler::RunTask

sqlservr!SOS_Scheduler::ProcessTasks

sqlservr!SchedulerManager::WorkerEntryPoint

sqlservr!SystemThread::RunWorker

sqlservr!SystemThreadDispatcher::ProcessWorker

sqlservr!SchedulerManager::ThreadEntryPoint

msvcr80!_callthreadstartex

msvcr80!_threadstartex

kernel32!BaseThreadStart

 

KB :2344600:FIX: "Non-yielding Scheduler" error may occur when you use the CONTAINSTABLE function together with many OR and AND predicates in SQL Server 2008 or in SQL Server 2008 R2

 

 

Stack 2

sqlservr!TMatchPattern

sqlservr!FMatchStrTxt

sqlservr!I8CharindexStrBhI8

sqlservr!CEs::GeneralEval4

sqlservr!CXStmtCond::XretExecute

sqlservr!CMsqlExecContext::ExecuteStmts<1,0>

sqlservr!CMsqlExecContext::FExecute

sqlservr!CSQLSource::Execute

sqlservr!process_request

sqlservr!process_commands 0x12a

sqlservr!SOS_Scheduler::RunTask

sqlservr!SOS_Scheduler::ProcessTasks

sqlservr!SchedulerManager::WorkerEntryPoint

sqlservr!SystemThread::RunWorker

sqlservr!SystemThreadDispatcher::ProcessWorker

sqlservr!SchedulerManager::ThreadEntryPoint

msvcr80!_callthreadstartex

msvcr80!_threadstartex

kernel32!BaseThreadInitThunk

ntdll!RtlUserThreadStart

2633357 FIX: "Non-yielding Scheduler" error might occur when you run a query that uses the CHARINDEX function in SQL Server 2008 R2

 

Stack 3

sqlservr!CItvlVal::Copy

sqlservr!CConstraintItvl::PcnstrItvlUnion

sqlservr!CConstraintProp::FBuildItvlFromOr

sqlservr!CConstraintProp::FBuildItvlFromPexpr

sqlservr!CConstraintProp::FAndItvlConstraint

sqlservr!CConstraintProp::AndNewConstraint

sqlservr!CConstraintProp::PcnstrDeriveSelect

sqlservr!CLogOp_Select::PcnstrDerive

sqlservr!CLogOpArg::PcnstrDeriveHandler

sqlservr!CLogOpArg::DeriveGroupProperties

sqlservr!COpArg::DeriveNormalizedGroupProperties

sqlservr!COptExpr::DeriveGroupProperties

sqlservr!COptExpr::DeriveGroupProperties 0xc6

sqlservr!COptExpr::DeriveGroupProperties

sqlservr!CQuery::PqoBuild

sqlservr!CStmtQuery::InitQuery

sqlservr!CStmtDML::InitNormal

sqlservr!CStmtDML::Init

sqlservr!CCompPlan::FCompileStep

sqlservr!CSQLSource::FCompile

sqlservr!CSQLSource::FCompWrapper

sqlservr!CSQLSource::Transform

KB: 982376 FIX: A non-yielding scheduler error or an error 8623 occurs when you run a query that contains a large IN clause in SQL Server 2005,SQL Server 2008, or SQL Server 2008 R2

 

Stack 4

sqlservr!COptExpr::AdjustParallelPlan

sqlservr!COptContext::PcxteOptimizeQuery

sqlservr!CQuery::Optimize

sqlservr!CQuery::PqoBuild

sqlservr!CStmtQuery::InitQuery

sqlservr!CStmtSelect::Init

sqlservr!CCompPlan::FCompileStep

sqlservr!CSQLSource::FCompile

sqlservr!CSQLSource::FCompWrapper

sqlservr!CSQLSource::Transform

sqlservr!CSQLSource::Execute

sqlservr!process_request

sqlservr!process_commands

sqlservr!SOS_Task::Param::Execute

sqlservr!SOS_Scheduler::RunTask

sqlservr!SOS_Scheduler::ProcessTasks

sqlservr!SchedulerManager::WorkerEntryPoint

sqlservr!SystemThread::RunWorker

sqlservr!SystemThreadDispatcher::ProcessWorker

sqlservr!SchedulerManager::ThreadEntryPoint

msvcr80!_callthreadstartex

msvcr80!_threadstartex

kernel32!BaseThreadStart

KB: 943060 FIX: A query that has many outer joins takes a long time to compile in SQL Server 2005

 

Stack 5

sqlservr!CXid::GetBlockingTask

sqlservr!SNode::SearchForDeadlock

sqlservr!DeadlockMonitor::SearchForDeadlock

sqlservr!DeadlockMonitor::SearchAndResolve

sqlservr!DeadlockMonitor::SearchTaskAndResolve

sqlservr!DeadlockMonitor::WorkLoop

sqlservr!lockMonitor

sqlservr!lockMonitorThread

sqlservr!SOS_Task::Param::Execute

sqlservr!SOS_Scheduler::RunTask

sqlservr!SOS_Scheduler::ProcessTasks

sqlservr!SchedulerManager::WorkerEntryPoint

sqlservr!SystemThread::RunWorker

sqlservr!SystemThreadDispatcher::ProcessWorker

sqlservr!SchedulerManager::ThreadEntryPoint

msvcr80!_callthreadstartex

msvcr80!_threadstartex

kernel32!BaseThreadStart

956854 Cumulative update package 10 for SQL Server 2005 Service Pack 2

 

Stack 6

ntdll!ZwQueryAttributesFile

ntdll!RtlDoesFileExists_UstrEx

ntdll!LdrpSearchPath

ntdll!LdrpCheckForLoadedDll

ntdll!LdrpLoadDll

ntdll!LdrLoadDll

kernel32!LoadLibraryExW

mswsock!SockLoadHelperDll

mswsock!SockGetTdiName

mswsock!SockSocket

mswsock!WSPSocket

ws2_32!WSASocketW

ws2_32!WSASocketA

sqlservr!CreateSocket

sqlservr!AcceptObject::AsyncAccept

sqlservr!Tcp::AcceptDone

sqlservr!SNIAcceptDoneWithReturnCode

sqlservr!SNIAcceptDoneWrapper

sqlservr!SNIAcceptDoneRouter

sqlservr!SOS_Node::ListenOnIOCompletionPort

sqlservr!SOS_Task::Param::Execute

sqlservr!SOS_Scheduler::RunTask

sqlservr!SOS_Scheduler::ProcessTasks

sqlservr!SchedulerManager::WorkerEntryPoint

sqlservr!SystemThread::RunWorker

sqlservr!SystemThreadDispatcher::ProcessWorker

sqlservr!SchedulerManager::ThreadEntryPoint

msvcr80!_callthreadstartex

msvcr80!_threadstartex

kernel32!BaseThreadStart

KB 2711549 FIX: An error message is logged when you start SQL Server 2008 R2 or when a client sends a request to SQL Server 2008 R2

 

Stack 7

ntdll!ZwOpenKey

advapi32!LocalBaseRegOpenKey

advapi32!RegOpenKeyExW

sqlservr!COledbConnect::GetProviderOptions

sqlservr!COledbConnect::SetClsidFromProvider

sqlservr!COledbConnect::Init

sqlservr!CStmtExecProc::XretRemoteExec

sqlservr!CRemoteProcExecLevel::Execute

sqlservr!CStmtExecProc::XretWrapRemoteExec

sqlservr!CStmtExecProc::XretExecExecute

sqlservr!CXStmtExec::XretExecute

sqlservr!CMsqlExecContext::ExecuteStmts

sqlservr!CMsqlExecContext::FExecute

sqlservr!CSQLSource::Execute

sqlservr!CStmtExecProc::XretLocalExec

sqlservr!CStmtExecProc::XretExecExecute

KB2468047 FIX: Error code 17883 or "Non-yielding Scheduler" error may occur when you use the OPENQUERY function on SQL Server 2005

 

Stack 8

ntdll!ZwQueryVirtualMemory

psapi!QueryWorkingSetEx

sqlservr!BPool::Shrink

sqlservr!BPool::ReleaseAwayBufs

sqlservr!BPool::LazyWriter

sqlservr!lazywriter

sqlservr!SOS_Task::Param::Execute

sqlservr!SOS_Scheduler::RunTask

sqlservr!SOS_Scheduler::ProcessTasks

sqlservr!SchedulerManager::WorkerEntryPoint

sqlservr!SystemThread::RunWorker

sqlservr!SystemThreadDispatcher::ProcessWorker

sqlservr!SchedulerManager::ThreadEntryPoint

msvcr80!_callthreadstartex

msvcr80!_threadstartex

kernel32!BaseThreadStart

967908 Cumulative update package 13 for SQL Server 2005 Service Pack 2 or 970279 Cumulative update package 4 for SQL Server 2005 Service Pack 3

 

Stack 9

sqlservr!LatchBase::ReleaseInternal

sqlservr!XVB::GetRecord

sqlservr!RowsetVersionScan::GetData

sqlservr!CQScanRowsetNew::GetRowWithPrefetch

sqlservr!CQScanRowsetNew::GetRow

sqlservr!CQScanNLJoinNew::GetRowHelper

sqlservr!CQScanNLJoinNew::GetRow

sqlservr!CQScanNLJoinNew::GetRowHelper

sqlservr!CQScanNLJoinNew::GetRow

sqlservr!CQueryScan::GetRow

sqlservr!CXStmtQuery::InitForExecute

sqlservr!CXStmtQuery::ErsqExecuteQuery

sqlservr!CXStmtCondWithQuery::XretExecute

sqlservr!CMsqlExecContext::ExecuteStmts<1,1>

sqlservr!CMsqlExecContext::FExecute

sqlservr!CSQLSource::Execute

sqlservr!CXStmtDML::FExecTrigger

sqlservr!CXStmtDML::FExecAllTriggers

sqlservr!CXStmtDML::XretDMLExecute

sqlservr!CXStmtDML::XretExecute

sqlservr!CMsqlExecContext::ExecuteStmts<0,1>

sqlservr!CMsqlExecContext::FExecute

sqlservr!CSQLSource::Execute

sqlservr!CStmtPrepQuery::XretExecute

sqlservr!CExecuteStatement::XretExecute

sqlservr!CMsqlExecContext::ExecuteStmts<1,1>

sqlservr!CMsqlExecContext::FExecute

sqlservr!CSQLSource::Execute

sqlservr!CStmtExecStr::XretExecStrExecute

sqlservr!CXStmtExecStr::XretExecute

sqlservr!CMsqlExecContext::ExecuteStmts<1,1>

sqlservr!CMsqlExecContext::FExecute

sqlservr!CSQLSource::Execute

sqlservr!process_request

sqlservr!process_commands

sqlservr!SOS_Task::Param::Execute

sqlservr!SOS_Scheduler::RunTask

sqlservr!SOS_Scheduler::ProcessTasks

sqlservr!SchedulerManager::WorkerEntryPoint

sqlservr!SystemThread::RunWorker

sqlservr!SystemThreadDispatcher::ProcessWorker

sqlservr!SchedulerManager::ThreadEntryPoint

msvcr80!_callthreadstartex

msvcr80!_threadstartex

kernel32!BaseThreadStart

KB : 949595 FIX: Error message when you run a query that uses a join condition in SQL Server 2005: "Non-yielding Scheduler"

 

Stack 10

sqlservr!SQLServerLogIter::LookupScanCache

sqlservr!SQLServerLogIterForward::GetNextBlock

sqlservr!SQLServerLogIterForward::GetNext

sqlservr!LsMgr::GetEndOfLog

sqlservr!LsMgr::ProcessInternalRollForward

sqlservr!LsWorkRequest::Execute

sqlservr!LsWorker::ThreadRoutine

sqlservr!LsWorker::ThreadRoutine

sqlservr!SOS_Task::Param::Execute

sqlservr!SOS_Scheduler::RunTask

sqlservr!SOS_Scheduler::ProcessTasks

sqlservr!SchedulerManager::WorkerEntryPoint

sqlservr!SystemThread::RunWorker

sqlservr!SystemThreadDispatcher::ProcessWorker

sqlservr!SchedulerManager::ThreadEntryPoint

msvcr80!_callthreadstartex

msvcr80!_threadstartex

kernel32!BaseThreadStart

KB 970044 FIX: Error message when you try to break database mirroring between two servers that are running SQL Server 2008: "Non-yielding Scheduler"

 

Stack 11

sqlservr!CLinkedMap

sqlservr!CCheckReadersAndWriters::Release

sqlservr!CMainIlb::~CMainIlb

sqlservr!CBlobHandleFactoryMain::ReleaseILockBytes

sqlservr!CMainIlb::Release

sqlservr!CTraceRpcBinaryStream::~CTraceRpcBinaryStream

sqlservr!CTraceTvpData::~CTraceTvpData

sqlservr!CRpcTraceHelper::CleanUpTraceTvpData

sqlservr!CRpcTraceHelper::TracePostExec

sqlservr!CRPCExecEnv::OnExecFinish

sqlservr!process_request

sqlservr!process_commands

sqlservr!SOS_Task::Param::Execute

sqlservr!SOS_Scheduler::RunTask

sqlservr!SOS_Scheduler::ProcessTasks

sqlservr!SchedulerManager::WorkerEntryPoint

sqlservr!SystemThread::RunWorker

sqlservr!SystemThreadDispatcher::ProcessWorker

sqlservr!SchedulerManager::ThreadEntryPoint

msvcr80!endthreadex

msvcr80!endthreadex

kernel32!BaseThreadInitThunk

ntdll!RtlUserThreadStart

KB 2520808 FIX: Non-yielding scheduler error when you run a query that uses a TVP in SQL Server 2008 or in SQL Server 2008 R2 if SQL Profiler or SQL Server Extended Events is used

 

Stack 12

ntdll!ZwFreeVirtualMemory

KERNELBASE!VirtualFree

sqlservr!MemoryNode::VirtualFree

sqlservr!ReservedMemBlock::FreeMemory

sqlservr!MultiPageAllocator::FreePagesInternal

sqlservr!MultiPageAllocator::FreePages

sqlservr!MemoryNode::FreePagesInternal

sqlservr!MemoryClerkInternal::FreePagesInline

sqlservr!CVarPageMgr::Release

sqlservr!CMemObj::Free

sqlservr!CMemThread<CMemObj>::Free

sqlservr!LockBytesSS::~LockBytesSS

sqlservr!LockBytesHolder::`scalar deleting destructor'

sqlservr!LockBytesHolder::DestroyCallback

sqlservr!CacheLbss

sqlservr!LockBytesSS::Release

sqlservr!CQueryIlb::~CQueryIlb

sqlservr!CBlobHandleFactoryMain::ReleaseILockBytes

sqlservr!CMainIlb::Release

sqlservr!CTraceRpcBinaryStream::~CTraceRpcBinaryStream

sqlservr!CTraceTvpData::~CTraceTvpData

sqlservr!CRpcTraceHelper::CleanUpTraceTvpData

sqlservr!CRpcTraceHelper::TracePostExec

sqlservr!CRPCExecEnv::OnExecFinish

sqlservr!process_request

sqlservr!process_commands

sqlservr!SOS_Task::Param::Execute

sqlservr!SOS_Scheduler::RunTask

sqlservr!SOS_Scheduler::ProcessTasks

sqlservr!SchedulerManager::WorkerEntryPoint

sqlservr!SystemThread::RunWorker

sqlservr!SystemThreadDispatcher::ProcessWorker

sqlservr!SchedulerManager::ThreadEntryPoint

msvcr80!endthreadex

msvcr80!endthreadex

kernel32!BaseThreadInitThunk

ntdll!RtlUserThreadStart

KB 2520808 FIX: Non-yielding scheduler error when you run a query that uses a TVP in SQL Server 2008 or in SQL Server 2008 R2 if SQL Profiler or SQL Server Extended Events is used

 

Stack 13

sqlservr!CompareStringWEnglishNoCase

sqlservr!CTypeInfo::ICompW

sqlservr!CDefaultCollation::ICompW

sqlservr!CDependElem::ICompare

sqlservr!CDependList::Find

sqlservr!CDependList::Insert

sqlservr!CDependList::Concat

sqlservr!CDependList::CollectDependencies

sqlservr!FillSysdepends

sqlservr!CProchdr::CreateProc

sqlservr!CSQLSource::PerformPphFakeExecute

sqlservr!CSQLSource::Execute

sqlservr!process_request

sqlservr!process_commands

sqlservr!SOS_Task::Param::Execute

sqlservr!SOS_Scheduler::RunTask

sqlservr!SOS_Scheduler::ProcessTasks

sqlservr!SchedulerManager::WorkerEntryPoint

sqlservr!SystemThread::RunWorker

sqlservr!SystemThreadDispatcher::ProcessWorker

sqlservr!SchedulerManager::ThreadEntryPoint

msvcr80!_callthreadstartex

msvcr80!_threadstartex

kernel32!BaseThreadInitThunk

ntdll!RtlUserThreadStart

KB 2306162 FIX: Poor performance and some occasional non-yielding scheduler errors occur when you create a complex view that references a large amount of nested views or tables in SQL Server 2008 or in SQL Server 2008 R2

 

Stack 14

sqlservr!BaseSharedHoBt::GetHoBtId

sqlservr!HoBtFactory::GetDeferredDropCacheHobt

sqlservr!DropDeferredWorkTables

sqlservr!GhostRecordCleanupTask

sqlservr!CGhostCleanupTask::ProcessTskPkt

sqlservr!TaskReqPktTimer::ExecuteTask

sqlservr!OnDemandTaskContext::ProcessTskPkt

sqlservr!SystemTaskContext::ExecuteFunc

sqlservr!SystemTaskEntryPoint

sqlservr!OnDemandTaskContext::FuncEntryPoint

sqlservr!SOS_Task::Param::Execute

sqlservr!SOS_Scheduler::RunTask

sqlservr!SOS_Scheduler::ProcessTasks

sqlservr!SchedulerManager::WorkerEntryPoint

sqlservr!SchedulerManager::FiberEntryPoint

kernel32!BaseFiberStart

kernel32!RtlCompareMemoryStub

KB 2505256 FIX: Poor performance when worktables that are marked for deferred drop are cleaned up in SQL Server 2008 R2

 

Stack 15

ntdll!ZwReadFile

kernel32!ReadFile

sqlservr!DiskReadAsync

sqlservr!FCB::AsyncRead

sqlservr!BackupIoRequest::StartDatabaseRead

sqlservr!BackupCopyMachine::CopyFileToBackupSet0

sqlservr!BackupCopyMachine::CopyFileToBackupSet

KB 960543 FIX: SQL Server 2005 or SQL Server 2008 may stop responding when you are performing a backup

 

Stack 16

sqlservr!Worker::ProfilingCPUTicks::ProfilingCpuTicksCallback

sqlservr!SOS_Scheduler::TaskTransition

sqlservr!SOS_Scheduler::Switch

sqlservr!SOS_Scheduler::SuspendNonPreemptive

sqlservr!SOS_Scheduler::Suspend

sqlservr!SOS_Task::Sleep

sqlservr!BTreeMgr::Seek

sqlservr!BTreeMgr::GetHPageIdWithKey

sqlservr!IndexPageManager::GetPageWithKey

sqlservr!GetRowForKeyValue

sqlservr!IndexRowScanner::EstablishInitialKeyOrderPosition

sqlservr!IndexDataSetSession::GetNextRowValuesInternal

sqlservr!RowsetNewSS::GetNextRows

sqlservr!CMEDScan::FGetRow

sqlservr!CMEDCatalogOwner::GetOwnerAliasIdFromSid

sqlservr!CMEDCatalogOwner::LookupPrimaryIdInCatalog

sqlservr!CMEDCacheEntryFactory::GetProxiedCacheEntryByAltKey

sqlservr!CMEDCatalogOwner::GetProxyOwnerBySID

sqlservr!CMEDProxyDatabase::GetOwnerBySID

sqlservr!GetDefaultSchemaIdCrossDb

sqlservr!GetCtxtSchemaId

sqlservr!CMEDAccess::GetMultiNameObject

sqlservr!CRangeObject::CImplName::FSameObject

sqlservr!CRangeObject::FCheckImplNames

sqlservr!CRangeObject::XretPostSchemaChecks

sqlservr!CRangeObject::XretSchemaChanged

sqlservr!CRangeTable::XretSchemaChanged

sqlservr!CEnvCollection::XretSchemaChanged

sqlservr!CXStmtQuery::XretSchemaChanged

sqlservr!CXStmtSelect::XretExecute

sqlservr!CMsqlExecContext::ExecuteStmts<1,1>

sqlservr!CMsqlExecContext::FExecute

sqlservr!CSQLSource::Execute

sqlservr!CStmtExecProc::XretLocalExec

sqlservr!CStmtExecProc::XretExecExecute

sqlservr!CXStmtExecProc::XretExecute

sqlservr!CMsqlExecContext::ExecuteStmts<1,1>

sqlservr!CMsqlExecContext::FExecute

sqlservr!CSQLSource::Execute

sqlservr!process_request

sqlservr!process_commands

sqlservr!SOS_Task::Param::Execute

sqlservr!SOS_Scheduler::RunTask

sqlservr!SOS_Scheduler::ProcessTasks

sqlservr!SchedulerManager::WorkerEntryPoint

sqlservr!SystemThread::RunWorker

sqlservr!SystemThreadDispatcher::ProcessWorker

sqlservr!SchedulerManager::ThreadEntryPoint

KB 2699013 FIX: SQL Server 2008 R2 or SQL Server 2008 stops responding and a "Non-yielding Scheduler" error is logged

 

Stack 17

sqlservr!CQScanNLJoinNew::GetRowHelper

sqlservr!CQScanNLJoinNew::GetRowHelper

sqlservr!CQueryScan::GetRow

sqlservr!CXStmtQuery::ErsqExecuteQuery

sqlservr!CXStmtCondWithQuery::XretExecute

sqlservr!CExecStmtLoopVars::ExecuteXStmtAndSetXretReturn

sqlservr!CMsqlExecContext::ExecuteStmts<1,0>

sqlservr!CMsqlExecContext::FExecute

sqlservr!CSQLSource::Execute

sqlservr!CXStmtDML::FExecTrigger

sqlservr!CXStmtDML::FExecAllTriggers

sqlservr!CXStmtDML::XretDMLExecute

sqlservr!CXStmtDML::XretExecute

sqlservr!CExecStmtLoopVars::ExecuteXStmtAndSetXretReturn

sqlservr!CMsqlExecContext::ExecuteStmts<0,1>

sqlservr!CMsqlExecContext::FExecute

sqlservr!CSQLSource::Execute

sqlservr!CStmtPrepQuery::XretExecute

sqlservr!CMsqlExecContext::ExecuteStmts<1,1>

sqlservr!CMsqlExecContext::FExecute

sqlservr!CSQLSource::Execute

sqlservr!process_request

sqlservr!process_commands

sqlservr!SOS_Task::Param::Execute

sqlservr!SOS_Scheduler::RunTask

sqlservr!SOS_Scheduler::ProcessTasks

sqlservr!SchedulerManager::WorkerEntryPoint

sqlservr!SystemThread::RunWorker

sqlservr!SystemThreadDispatcher::ProcessWorker

sqlservr!SchedulerManager::ThreadEntryPoint

msvcr80!_callthreadstartex

msvcr80!_threadstartex

kernel32!BaseThreadInitThunk

KB 967169 FIX: When you run an UPDATE statement against a table that has a FOR UPDATE trigger that joins the DELETED and INSERTED tables, the query takes a long time to finish

Stack 18

msvcr80!memcpy

BackupString::vswcatf

BackupString::swcatf

BackupHistory::GenerateBackupDetails

sqlservr!BackupHistory::GenerateBackupSet

KB 917971 FIX: You may receive more than 100,000 page faults when you try to back up a SQL Server 2005 database that contains hundreds of files and file groups.

 

Related blogs:http://mssqlwiki.com/2012/08/17/how-to-analyze-non-yielding-scheduler-dumps/

 

If you liked this post, do like us on Facebook at https://www.facebook.com/mssqlwiki and join our Facebook group https://www.facebook.com/mssqlwiki#!/groups/454762937884205/

 

 

Thank you,

Karthick P.K |Technical Lead | Microsoft SQL Server Support |My Facebook Page |My Site| Blog space| Twitter

Comments
  • I'm getting ^ Extra character error in 'sqlserver!g_copiedStackInfo+0×20'

  • My bad i missed .cxr try below command

    .cxr sqlserver!g_copiedStackInfo+0×20

  • Nice compilation! Good job, Karthick :)

  • I got the following output when i'm done with step 6.

    sqlservr!CErrorReportingManager::WriteToErrLog

    sqlservr!CErrorReportingManager::SendErrorToErrLog

    sqlservr!CErrorReportingManager::CwchFormatAndPrint

    sqlservr!scierrlog

    sqlservr!FCB::ReportLongIO

    sqlservr!IoRequestDispenser::CheckForLongIo

    sqlservr!BPool::LazyWriter

    sqlservr!lazywriter

    sqlservr!SOS_Task::Param::Execute

    sqlservr!SOS_Scheduler::RunTask

    sqlservr!SOS_Scheduler::ProcessTasks

    sqlservr!SchedulerManager::WorkerEntryPoint

    sqlservr!SystemThread::RunWorker

    sqlservr!SystemThreadDispatcher::ProcessWorker

    sqlservr!SchedulerManager::ThreadEntryPoint

    msvcr80!endthreadex

    msvcr80!endthreadex

    kernel32!BaseThreadInitThunk

    ntdll!RtlUserThreadStart

    Can you please help me with this?

  • Patz,

    Check your disk performance. SQL Server is trying to print "i/o requests taking longer than 15 seconds to complete on file" toerrolog file and there is delay writting to errolog file as well.  Fix the disk performance You can follow the steps in below blog.

    mssqlwiki.com/.../io-requests-taking-longer-than-15-seconds-to-complete-on-file

  • I'm getting Couldn't resolve error at 'sqlserver!g_copiedStackInfo+0×20' on

    .cxr sqlserver!g_copiedStackInfo+0×20

    what's wrong?

    thank you

  • Alex, Its  .cxr sqlservr!g_copiedStackInfo+0X20  (you have to remove additional e)

  • Thanks Karthick. What does stack mean? Any clues plz

    Call Site

    msvcr80!memcpy

    sqlservr!CSbMirrorRouteKey::CSbMirrorRouteKey

    sqlservr!ConvertRpcBinaryToText

    sqlservr!TraceUtil::SetRpcData

    sqlservr!alloca_probe

    sqlservr!CMsqlExecContext::EventStartEndProc

    sqlservr!alloca_probe

    sqlservr!CMsqlExecContext::FExecute

    sqlservr!CSQLSource::Execute

    sqlservr!process_request

    sqlservr!process_commands

    sqlservr!SOS_Task::Param::Execute

    sqlservr!SOS_Scheduler::RunTask

    sqlservr!SOS_Scheduler::ProcessTasks

    sqlservr!SchedulerManager::WorkerEntryPoint

    sqlservr!SystemThread::RunWorker

    sqlservr!SystemThreadDispatcher::ProcessWorker

    sqlservr!SchedulerManager::ThreadEntryPoint

    msvcr80!_callthreadstartex

    0x0

    0x0

    0x0

    0x0

    msvcr80!_threadstartex

    msvcr80!_threadstartex

    msvcr80!__initialmbcinfo

    0x0

  • I got the following mini-dump on SQL 2005 SP2 version 9.00.3186.00  on a Windows NT 5.2 Build 3790 CSD Service Pack 2 failover cluster:

    ....

    0:052> .cxr sqlservr!g_copiedStackInfo+0X20

    rax=00000000000014c8 rbx=000000031ffd6f00 rcx=00000000032c9170

    rdx=000007fffff54000 rsi=0000000003990580 rdi=0000000006cbf140

    rip=000000000175e29b rsp=0000000006cbf020 rbp=0000000006cbf1e8

    r8=00000003688d41c0  r9=00000000032c9170 r10=000000032635f320

    r11=0000000000000000 r12=0000000000000002 r13=0000000000000001

    r14=00000000000000ff r15=0000000006cbf058

    iopl=0         nv up ei pl nz na pe nc

    cs=0033  ss=002b  ds=0000  es=0000  fs=0000  gs=0000             efl=00000202

    sqlservr!PerCPUDataImpl::GetObjectData+0x1b:

    00000000`0175e29b ??              ???

    0:052> kc 100

    Call Site

    sqlservr!PerCPUDataImpl::GetObjectData

    sqlservr!alloca_probe

    sqlservr!AppendOnlyUnitPageRef::Fix

    sqlservr!AppendOnlyVerStoreMgr::GetColumnsFromVerRec

    sqlservr!AppendOnlyVerStoreMgr::GetRecordChainInfo

    sqlservr!XVB::GetRecordChainInfo

    sqlservr!RowsetVersionScan::GetNextRows

    sqlservr!CQScanRowsetNew::GetRowWithPrefetch

    sqlservr!CQScanRowsetNew::GetRowHelper

    sqlservr!CQScanNLJoinNew::GetRowHelper

    sqlservr!CQScanNLJoinNew::GetRowHelper

    sqlservr!CQueryScan::GetRow

    sqlservr!CXStmtQuery::ErsqExecuteQuery

    sqlservr!CXStmtCondWithQuery::XretExecute

    sqlservr!CMsqlExecContext::ExecuteStmts<1,1>

    sqlservr!CMsqlExecContext::FExecute

    sqlservr!CSQLSource::Execute

    sqlservr!CXStmtDML::FExecTrigger

    sqlservr!CXStmtDML::FExecAllTriggers

    sqlservr!alloca_probe

    sqlservr!CMsqlExecContext::ExecuteStmts<1,1>

    sqlservr!CMsqlExecContext::FExecute

    sqlservr!CSQLSource::Execute

    sqlservr!process_request

    sqlservr!process_commands

    sqlservr!SOS_Task::Param::Execute

    sqlservr!SOS_Scheduler::RunTask

    sqlservr!SOS_Scheduler::ProcessTasks

    sqlservr!SchedulerManager::WorkerEntryPoint

    sqlservr!SystemThread::RunWorker

    sqlservr!SystemThreadDispatcher::ProcessWorker

    sqlservr!SchedulerManager::ThreadEntryPoint

    msvcr80!endthreadex

    msvcr80!endthreadex

    kernel32!BaseThreadStart

    Can you let me know if there's anything to be done, users are complaining the system is slow

  • Diane, This issue is because of a know issue and already fixed. Apply the latest SP and CU for SQL2005. It will solve your issue.

Page 1 of 1 (10 items)
Leave a Comment
  • Please add 6 and 8 and type the answer here:
  • Post