SQL Server 2005 Connectivity Issue Troubleshoot - Part I

SQL Server 2005 Connectivity Issue Troubleshoot - Part I

Rate This

This post provides some tips to troubleshoot Sql Server connection problems based on various displayed error messages. And, I will describe connection problems according to different client stack: SNAC/MDAC/SQLClient. Thus, there are 3 parts for this topic.

 

First Part – Troubleshoot SNAC connect to SQL Server 2005

Second Part - Troubleshoot MDAC connect to SQL Server 2005

Third Part – Troubleshoot SqlClient connect to SQL Server 2005

 

Before start, it is very important to identify which client connected to Server and failed. Here, I list out follow key terminology in Sql Server Connection.

 

SNAC - A new data access technology that is new in SQL Server 2005, and is a stand alone data access application programming interface that is used for both ODBC and OLEDB.

 

MDAC - Microsoft Data Access Component contains core data access components, such as OLEDB provider and ODBC provider.

 

SqlClient  - Access data from within a CLR database object by using the .NET Framework Data Provider for SQL Server.

 

Protocol Prefix: explicitly specify which protocol you want to use to make connection. Supported protocol prefix in Sql Server 2005 includes: “lpc:”, “np:”, “tcp:”, “via:”

 

Last connect cache – contains the fully resolved/specified connection strings for the instances that were successfully connected to. 

 

Part I – Connection Fail when SNAC connects to Sql Server 2005

 

Use osql.exe to simulate the connection string in your application and quick troubleshoot if your application uses ODBC provider and use sqlcmd.exe for OLEDB provider. They are located in %SYSTEMDRIVE%\Program Files\Microsoft Sql Server\90\tools\binn.

 

Basic connection string:          osql(sqlcmd) /S[prefix]<servername> /E

                                                Osql(sqlcmd) /S[prefix]<servername>\<Instance> /E

In each follow Message, there are two, one is from ODBC, and the other one is from OLEDB.

 

Message 1:

 

[SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [53].
[SQL Native Client]Login timeout expired
[SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.


-OR-

 

HResult 0x35, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [53].
Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..

Error: Microsoft SQL Native Client : Login timeout expired.

 

This indicates that your target server can not be accessed or does not exist. Try to use "ping <servername>" , " ping <ipofserver>" , "ping -a <ip>", If either of the pings time out, fail, or do not return the correct values, then either the DNS lookup is not working properly or there is some other networking or routing issue that you will need to resolve.

 

Message 2:

 

[SQL Native Client]Named Pipes Provider: Could not open a connection to SQL

Server [2].

[SQL Native Client]Login timeout expired

[SQL Native Client]An error has occurred while establishing a connection to

the server. When connecting to SQL Server 2005, this failure may be caused by

the fact that under the default settings SQL Server does not allow remote connections.

 

-OR-

 

HResult 0x2, Level 16, State 1

Named Pipes Provider: Could not open a connection to SQL Server [2].

Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..

Error: Microsoft SQL Native Client : Login timeout expired.

 

This error message means that the server was not found or not running or can not make Named Pipe connection through the pipe name that client specified. To verify this:

 

1) From the command line, do "sc query mssqlserver" or "sc query mssql$<instancename>" to check whether sql instance present.  Then open sql server configuration manager -> check the state of the sql service, if it is not running, start it. If server started fail, check event log or server error log, see what happened there.

2)  if you are sure the service is running and shared memory/Named Pipe enabled, please try connection if it is local default instance "osql /Snp:\\.\pipe\sql\query"; or try connection "osql /Snp:\\.\pipe\mssql$<InstanceName>\sql\query" if it is local named instance. if you still get error 2, then go to step 3).

3) Double check the server is started and listening on named pipe if you enabled Named Pipe. One way is that see the ERRORLOG of the server, search follow keywords: 

Server named pipe provider is ready to accept connection on [ \\.\pipe\sql\query ] or [\\.\pipe\mssql$<InstanceName>\sql\query] 

Notice that "sql\query" is the default pipe name, so you need to know server is listening on which pipe name. eg: if you specify server pipe name is "sql\query1", then you would see in the errorlog that server listening on [ \\.\pipe\sql\query1 ]. 

4) See your connection string, whether you explicitly specify the pipe name and does it match the pipe that server is listening on? Or whether you just specify server name( like ".","(local)", etc), but you specify the wrong pipe name on client side Named Pipe configuration.eg, go to SQL Server Configuration Manager, click client Named Pipe properties, see whether the pipe name is same with the one server listening on. 

Note: For remote connection, you need to verify step 2) and 3).  

Message 3:

 

[SQL Native Client]Named Pipes Provider: Could not open a connection to SQL

Server [233].

[SQL Native Client]Login timeout expired

[SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.

 

 -OR-

 

HResult 0xE9, Level 16, State 1

Named Pipes Provider: Could not open a connection to SQL Server [233].

Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..

Error: Microsoft SQL Native Client : Login timeout expired.

 

Note: the difference between Message 2 and Message 1 is “Could not open a connection to SQL Server [233].” – error state.

 

You might specify the server name as FQDN/127.0.0.1/ IP Address and NP was disabled on the server. To resolve this, first way is to replace server name as the machine name or “.” or”(local)” or “<machinename>” and you should be able to connect as long as server listening on Shared Memory; second way is to enable named pipe from sql configuration manager and restart server.

 

Message 4:

 

[SQL Native Client]Named Pipes Provider: No process is on the other end of the pipe.

[SQL Native Client]Communication link failure

[SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.

 

-OR-

 

HResult 0xE9, Level 16, State 1

Named Pipes Provider: No process is on the other end of the pipe.

Error: Microsoft SQL Native Client : Communication link failure.

Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..

 

1) Local connection: You might specify the server name as FQDN/127.0.0.1/ IP Address in the connection string and speculate connection through Named Pipe provider. To resolve this, either change server name to <machinename> as long as the server is listening on Shared Memory or enabled NP.

2) Remote connection: the server is not listening on Name Pipe. To resolve this, enable name pipe on the remote server and restart the server.

 

Message 5:

 

[SQL Native Client]SQL Network Interfaces: Server doesn't support requested protocol [xFFFFFFFF].

[SQL Native Client]Login timeout expired

[SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.

 

-OR-

 

HResult 0xFFFFFFFF, Level 16, State 1

SQL Network Interfaces: Server doesn't support requested protocol [xFFFFFFFF].

Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..

Error: Microsoft SQL Native Client : Login timeout expired.

 

1)     Local connection: You might explicitly specify protocol prefix “np:” and connect to a named instance and NP was disabled.

2)     Remote connection: You might connect to remote named instance and remote server is not listening on name pipe.

To resolve this, enable NP if you only want to use name pipe protocol or you can remove “np:” prefix to let connection over shared memory locally.

 

Message 6:

 

[SQL Native Client]SQL Network Interfaces: Error Locating Server/Instance Specified [0xFFFFFFFF].

[SQL Native Client]Login timeout expired

[SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remot the connections.

 

-OR-

 

HResult 0xFFFFFFFF, Level 16, State 1
SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF].

Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not

allow remote connections..

Error: Microsoft SQL Native Client : Login timeout expired.

 

You might connect to local named instance and explicitly specify protocol prefix “tcp:” or “np:” in the connection string, however, SqlBrowser service was not running.

To resolve this, you should enable Sqlbrowser service on the server

1)     Use net start or go to sql configuration manager(SSCM), check whether sqlbrowser service is running, if not, start it.

2)     You still need to make sure SqlBrowser is active. Go to SSCM, click properties of sqlbrowser service -> Advanced-> Active “Yes” or “No”, if sqlbrowser is running but is not active, the service would not serve you correct pipe name and Tcp port info on which your connection depends.

 

Message 7: Shared Memory provider error

 

HResult 0x2, Level 16, State 1

Shared Memory Provider: Could not open a connection to SQL Server [2].

Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..

Error: Microsoft SQL Native Client : Login timeout expired.

 

-OR- 

 

[SQL Native Client]Shared Memory Provider: Could not open a connection to SQLServer [2].

[SQL Native Client]Login timeout expired

[SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.

The error indicate you speculated shared memory as connection protocol and server is not listening on shared memory, plus you probably specified “.”/”(local)”/<machinename> /localhost as the server name in the connection string. To resolve this, enable shared memory protocol and restart the server.

 

Message 8:

 

[SQL Native Client]SQL Network Interfaces: Cannot open a Shared Memory connection to a remote SQL server [87].

[SQL Native Client]Login timeout expired

[SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.

 

-OR-

 

HResult 0x57, Level 16, State 1

SQL Network Interfaces: Cannot open a Shared Memory connection to a remote SQL server [87].

Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not  allow remote connections..

Error: Microsoft SQL Native Client : Login timeout expired.

The reason is same as the one of Message 6, just you might specify FQDN/127.0.0.1/IP Address as server name in the connection string.

 

Message 9: TCP specific

 

[SQL Native Client]TCP Provider: No connection could be made because the target machine actively refused it.

[SQL Native Client]Login timeout expired

[SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.

 

-OR-

 

HResult 0x274D, Level 16, State 1

TCP Provider: No connection could be made because the target machine actively refused it.

Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not  allow remote connections..

Error: Microsoft SQL Native Client : Login timeout expired.

 

The reason is server is not listening on TCP, probably TCP protocol was not enabled.

 

-Follow messages are some special case - 

 

Message 10:

 

[SQL Native Client]Unable to complete login process due to delay in opening server connection.

 

Reason:

1)     There are spaces after Instance name in the connection string eg. osql /S”<machinename>\Instance  “ /E, to resolve this, you need to remove the trailing space.

2)     Connect through 127.0.01.

3)     Remote connection and WINS was disabled on the client machine and you connect using FQDN as server name. To resolve this, One way, turn on “File and Printer Sharing” and explicitly use name pipe protocol. Another is enlarge the connect timeout to around 30 secondes.

 

Message 11: - Firewall specific

 

HResult 0x274C, Level 16, State 1
An error has occurred while establishing a connection to the server. When connectiong to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.(provider:TCP Provider, errror:0-A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)

 

-OR-

 

Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..
Error: Microsoft SQL Native Client : Login timeout expired.

 

This is because connection blocked by firewall. To resolve this, take follow steps:

1)     Enable SqlBrowser, see the info in Message 4. Plus, add sqlbrowser.exe into Firewall exception list: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\DomainProfile\AuthorizedApplications\List
2)     Add Tcp port to Firewall exception list. (eg, Name-1433:TCP, Value-1433:TCP:*:Enabled:Tcp 1433).

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\DomainProfile\GloballyOpenPorts\List

For more detailed  operation, see http://support.microsoft.com/default.aspx?scid=kb;en-us;287932 

 

Message 12:

 

“[SQL Native Client] Can not Generate SSPI Message”

 

http://blogs.msdn.com/sql_protocols/archive/2005/10/19/482782.aspx 

 

Part II - Troubleshoot Connectivity Issue in SQL Server 2005

 

http://blogs.msdn.com/sql_protocols/archive/2005/10/29/486861.aspx

 

Part III - Troubleshoot Connectivity Issue in SQL Server 2005

 

http://blogs.msdn.com/sql_protocols/archive/2005/12/22/506607.aspx

 

 

Ming Lu SQL Server Protocols

Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights

Leave a Comment
  • Please add 7 and 8 and type the answer here:
  • Post
  • Most likely the port 1433 is blocked on this SQL Server by Windows Firewall.  Even if port 1433 is blocked by Windows Firewall, tools like SQL Management Studio can connect over named pipes, which goes over a different port.  The client will try tcp-ip and then named pipes and if one succeeds you can connect.

    So solution is to open TCP port 1433 on the SQL Server machine you cannot telnet to.

  • Thanks. Solved my connection problems

  • Here is an interesting scenerio I came across while migrating from SQL 2000 to SQL 2005.

    After migrating to SQL 2005 all users could connect to the server through the SQL management studio. But they were unable to make an ODBC connection to the server.

    After spending almost 2 days on this issue  I finally  dropped the login  and recreated it again. I was finally able to make an ODBC connection to the server.

    Interesting!!.

    Shilpi Balan

  • Hi,

    I have a connectivity problem in accessing SQL server 2000 using dotnet provider(SQL client). I tried connecting using visual web developer 2005.

    1) I can connect to SQL server using OLEDB provider but dotnet provider(SQL client) is failing with exception "Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding"

    2) I can connect to other SQL servers without any problem.

    So I guess the problem is related to this particular SQL server. I wonder any extra configuration setting should be required in SQL server to communicate with Dot net provider.

    Any help is greatly appreciated.

    Thanks,

    Rakesh

  • Hi, I am having a connection failed error in SQL. This is the full error we are getting.

    Connection faiiled:

    SQLState:'01000'

    SQL Server Error: 10060

    [Microsoft][ODBC SQL Sever Driver][TCP/IP Sockets]ConnectionOpen (connect()).

    Connection failed:

    SQLState:'08001'

    SQLServer:17

    [Microsoft][ODBC SQL Server Driver]SQL Server dose not exist or access denied.

    Any help would be great or if you could point me in the right direction. Thank you.

  • Hi, Redcell

       Can you answer the question by followin the below guidence for us to further help you:

    http://forums.microsoft.com/MSDN/ShowForum.aspx?ForumID=87&SiteID=1

    Thanks!

    Ming.

  • I don't think that would be the reason.

  • I m getting this error during the login process, i m unable to login even though i m entering the right username and password. Plz help me for this. First Time Error - "A connection was successfully established with server, but then an error occured during the login process (provider : Shared Meomary Provider, error : 0 - No Process is on the other end of the pipe) (Microsoft SQL Server, Error : 233)" followed by error (Repeated error) login failed for user 'sa' (microsoft SQL Server Error, 18456.

  • Hi, Ashwani

       Please check out the server errorlog, which will give you the info that why your client connection got rejected.

    Good Luck!

    Ming.

  • Unable to connect to server MMSINDIA:

    Server: Msg 17, Level 16, State 1

    [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.

    please help me

  • Memo: The same error is generated if you have two or more TCP/IP addresses on your server. This error is usully removed if you call your server not by DNS name, but by address, as

    123.45.67.89\SQLEXPRESS

    in ODBC or in SQL Management Studio.

  • I'm puzzled. None of these is the message I get. Besides, I spent the best part of a morning copying a database from SQL2K to this instance, debugging, and getting a connection from a client app. When I left, it was all working, and I did the whole thing by remote desktop connect to the server and running Mgmt Studio on the server by remote connection.

    A day later, the client can't connect and when I try and use Mgmt Studio by remote connect to the SQL Server I get:

    Cannot connect to SQLSERVE.

    An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)

    Help on the error says the service is not started, but it is.

    ERRORLOG shows no info since I successfully accessed the SQL server on the 19th.

    Two questions:

    1. How to resolve?

    2. How did this get changed?

  • I am trying to run the replication merge agent for the first time for  a replication.  Several servers already replicate to the same server without problems.  I have replicated all the previous Publishers to my subscriber with the identical setup with the exception of the user login into the server.  The user login sees the appropriate tables in the subscriber yet the first synchronization errors with the following:

    rror messages:

    The process could not connect to Subscriber 'hera'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20084) Get help: http://help/MSSQL_REPL20084 Named Pipes Provider: Could not open a connection to SQL Server [53].

    (Source: MSSQLServer, Error number: 53)

    Get help: http://help/53

    An error has occurred while establishing a connection to the server.

    When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (Source: MSSQLServer, Error number: 53) Get help: http://help/53 Login timeout expired (Source: MSSQLServer, Error number: 0) Get help: http://help/0 The merge process failed to execute a query because the query timed out.

    If this failure continues, increase the query timeout for the process.

    When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write. (Source:

    MSSQLServer, Error number: 0)

    Get help: http://help/0

    The subscription to publication 'PUB_1' could not be verified. Ensure that all Merge Agent command line parameters are specified correctly and that the subscription is correctly configured. If the Publisher no longer has information about this subscription, drop and recreate the subscription.  (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201019) Get help: http://help/MSSQL_REPL-2147201019

    Have any of you seen this error before?  Do you know of a possible solution?

    Thank you,

    Pete Ocasio

    Senior Software Developer

  • do you have same page for Server 2008?

  • This situation occurs in SQL Server 2005.  While I have sql server 2008 Nov beta installed in another system, i have not even started testing replication in 2008.  I have 85 replicated databases in 2000 and 8 in 2005. Any ideas on solving the problem?

Page 7 of 10 (142 items) «56789»