If broken it is, fix it you should

Using the powers of the debugger to solve the problems of the world - and a bag of chips    by Tess Ferrandez, ASP.NET Escalation Engineer (Microsoft)

Are you aware that you have thrown over 40,000 exceptions in the last 3 hours?

Are you aware that you have thrown over 40,000 exceptions in the last 3 hours?

Rate This
  • Comments 51

This may seem like a preposterous statement, but unfortunately it’s all too common.

In my work I go through a lot of dumps, somewhere in the neighborhood of 5-20 in a day:) Since the information is readily available to me, I usually do a quick check for the number of exceptions that the application has thrown and what types of exceptions they are so I can make the customers aware. More often than not, the applications are throwing a lot more exceptions than the developers expected, or they were expecting them but didn’t know that they can actually cause a problem since they don’t seem to have a direct effect on the application.

So why are they so bad? If they are handled and the end users don’t see them are they really harmful?

I can think of 3 reasons off the top of my head.

  • Exceptions are expensive.
  • Exceptions can take you into unnecessary code paths.
  • Exceptions are generally thrown when something went wrong.

Exceptions are expensive

Chris Brumme wrote an excellent blog on exceptions and how they work called The Exception Model that you should read if you have the time (definitely worth it).

In his blog he lists some of the things that happen when you throw an exception

  • Grab a stack trace by interpreting metadata emitted by the compiler to guide our stack unwind.
  • Run through a chain of handlers up the stack, calling each handler twice.
  • Compensate for mismatches between SEH, C++ and managed exceptions.
  • Allocate a managed Exception instance and run its constructor. Most likely, this involves looking up resources for the various error messages.
  • Probably take a trip through the OS kernel. Often take a hardware exception.
  • Notify any attached debuggers, profilers, vectored exception handlers and other interested parties.

Now, consider this piece of code:

   Myvar = (myClass) myParameter;
catch (Exception ex){
   // do some stuff to handle the exception. 

Instead of adding a check for if myParameter is null, you have now caused the application to perform all the tasks listed above, and as a special feature, the application has also thrown an additional 1st chance access violation exception (which it always does on a NullReferenceException) so some of the things above actually happen twice…

Before I go any further, there is another thing that I don’t like about the code sample above. We catch a generic exception, so we don’t actually know if it is a NullReferenceException we are catching, perhaps it needs to be handled another way if it is another type of exception. But, rest assured, it is better than catching exceptions and swallowing them without doing anything in the exception handler.

Exceptions can take you into unnecessary code paths.

I’d like to share a brief story about a case I had a long time back. The customers servers were performing moderately well but they were not completely satisfied and wanted us to identify potential bottlenecks. We attached a debugger and fairly soon it became apparent that they were throwing some exceptions they weren’t aware of. Unluckily for them, because of one of the exceptions they were throwing they ended up calling a function they were not expecting to call. This function went out and did queries to various different services. The check to avoid the exception was really simple and once they added it, low and behold, they increased their throughput by no less than 20 times… you heard it right 20 times, amazing huh?:) Talk about being completely satisfied with their performance after that…

A common example of when throwing an exception can block you, is the case where you have an global exception handler that logs the exception to an eventlog, database or file.

Don’t get me wrong, please do log your exceptions, but… make sure you do something about the exceptions you get. If your application throws 40,000 exceptions in 3 hours and you log these to a database or the eventlog, not only will your logs fill up pretty soon, but you are also likely to get a lot of contention writing to your log. (Especially the eventlog or a file since writing is usually serialized)

Exceptions are generally thrown when something went wrong.

If exceptions are generally thrown when something goes wrong, why do things go wrong so often? In the sample above, if you are expecting the parameter to be null about 20% of the time, perhaps it’s not an exception but rather just one of the cases.

I know we don’t live in a clean room, but a good way of thinking about exceptions is that an exception should only occur in the exceptional case. They shouldn’t be expected, and when they do happen, you should try to take measures to avoid them. Think of try/catch as a safety net rather than a program control feature.

So, now to the good part… here is how you find out how many .net exceptions you are throwing, and why and where…

In performance monitor you can watch the counters:

.NET CLR Exceptions/#Exceps Thrown (total number of exceptions thrown) and
.NET CLR Exceptions/#Exceps Thrown / sec

to get an idea of how many .net exceptions your application is throwing.

There are a few different ways you can figure out what exceptions you are throwing with windbg.exe and which one you choose depends a little bit on if you are in production or in a stress test environment where it doesn’t matter if you break in to the process and stop it for a while.

The different ways I’m going to show are

  1. Attaching and stopping on unmanaged exceptions
  2. Taking a snapshot memory dump and looking at the recent exceptions
  3. Leaving a debugger running and logging exceptions

Attaching and stopping on unmanaged exceptions

For demonstration purposes I have created a webform and simply call

Throw new System.Exception(“Test”)
from Page_Load

With windbg.exe attached to the w3wp.exe process I run

sxe CLR

to make the debugger stop on .net exceptions. Since we are going to examine some managed structures we should load the sos extension (.load clr10\sos) and then hit g for go.

Once we hit the first exception we should see something like this in the debugger window

(15c4.163c): CLR exception - code e0434f4d (first chance)

And we should be stopped on Kernel32!RaiseException since this is where we actually throw the native part of the CLR exception.

At this point we can use the following commands to figure out what our exception is and where it is being thrown

!cen (CheckExceptionName to print the exception type and address)

0:005> !cen
System.Exception (0x642e134)

and !clrstack (to print the managed stack)

0:005> !clrstack
Thread 5
ESP         EIP       
0x0c1bf6e4  0x77e55dea [FRAME: HelperMethodFrame] 
0x0c1bf710  0x0c2e0528 [DEFAULT] [hasThis] Void ExceptionsAndStuff.WebForm1.Page_Load(Object,Class System.EventArgs)
  at [+0x30] [+0x0] c:\inetpub\wwwroot\exceptionsandstuff\webform1.aspx.cs:21
0x0c1bf728  0x0c3192dc [DEFAULT] [hasThis] Void System.Web.UI.Control.OnLoad(Class System.EventArgs)
0x0c1bf738  0x0c319224 [DEFAULT] [hasThis] Void System.Web.UI.Control.LoadRecursive()
0x0c1bf74c  0x0c3184d7 [DEFAULT] [hasThis] Void System.Web.UI.Page.ProcessRequestMain()
0x0c1bf790  0x0c317207 [DEFAULT] [hasThis] Void System.Web.UI.Page.ProcessRequest()
0x0c1bf7cc  0x0c316c73 [DEFAULT] [hasThis] Void System.Web.UI.Page.ProcessRequest(Class System.Web.HttpContext)
0x0c1bf7d4  0x0c316c4c [DEFAULT] [hasThis] Void System.Web.HttpApplication/CallHandlerExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute()
0x0c1bf7e4  0x0c1d98b8 [DEFAULT] [hasThis] Class System.Exception System.Web.HttpApplication.ExecuteStep(Class IExecutionStep,ByRef Boolean)
0x0c1bf82c  0x0c1d9322 [DEFAULT] [hasThis] Void System.Web.HttpApplication.ResumeSteps(Class System.Exception)
0x0c1bf874  0x0c1d91eb [DEFAULT] [hasThis] Class System.IAsyncResult System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(Class System.Web.HttpContext,Class System.AsyncCallback,Object)
0x0c1bf890  0x01eb6897 [DEFAULT] [hasThis] Void System.Web.HttpRuntime.ProcessRequestInternal(Class System.Web.HttpWorkerRequest)
0x0c1bf8cc  0x01eb6448 [DEFAULT] Void System.Web.HttpRuntime.ProcessRequest(Class System.Web.HttpWorkerRequest)
0x0c1bf8d8  0x01eb2fc5 [DEFAULT] [hasThis] I4 System.Web.Hosting.ISAPIRuntime.ProcessRequest(I,I4)
0x0c1bf9a0  0x79217188 [FRAME: ContextTransitionFrame] 
0x0c1bfa80  0x79217188 [FRAME: ComMethodFrame]

This shows us that we have thrown an exception of type System.Exception in ExceptionsAndStuff.WebForm1.Page_Load (and since I had debug=true set in web.config we can also see the page name and line number)

To continue debugging hit gn (go not handled)

After the initial exception if I continue I will get two additional exceptions, first a System.Web.HttpUnhandledException in System.UI.Page.HandleError, and then a rethrow of this System.Web.HttpUnhandledException in System.Web.UI.Page.ProcessRequest. So we can see how this seemingly simple exception just caused me to pass through the exception handlers 3 times.

Debugging Tip!: To make this a bit more automated consider running

sxe -c "!cen;!clrstack;gn" CLR

Which stops on the CLR exception, runs !cen, !clrstack and then continues, so for each exception you will get the type and the call stack in the debugger window.

Taking a snapshot memory dump and looking at the recent exceptions

If you want to look at a production system and you’re throwing enough exceptions that logging in the debugger would slow down the application considerably, you can get a lot of information by taking a hang dump with adplus

adplus -hang –pn <PROCESSNAME.EXE>

With the dump loaded in windbg and with sos.dll loaded, run !dumpallexeptions (or !dae for short), this will show you all exception objects currently on the heap, i.e. all exceptions that have not yet been garbage collected, and should give you an idea of the types of exceptions your application is throwing. !dae gives a statistical view of the exceptions, to see the individual exceptions run !dae ���v (verbose mode).

Every time you run !dae you will notice 4 exceptions at the top. The NotSupportedException, ExecutionEngineException, StackOverflowException and OutOfMemoryException. This does not mean that these have been thrown. These exceptions are generated at startup in the case they should be needed since they can not be created at that point. (in other words, ignore these in most cases)

Further down we can see 3 ThreadAbortExceptions in HttpResponse.Redirect/HttpResponse.End and 4 SqlExceptions when trying to fill a dataset.

A redirect will always throw a ThreadAbortException since it needs to stop further execution of the current page, this can be avoided by setting the second parameter of Redirect to false, but then of course the code on the current page will continue running.

0:000> !dae
Number of exceptions of this type:        1
Exception 0x151ce76c in MT 0x79bf44d4: System.NotSupportedException
_message: Specified method is not supported.
Number of exceptions of this type:        1
Exception 0x180000bc in MT 0x79b94ee4: System.ExecutionEngineException
Number of exceptions of this type:        1
Exception 0x1800007c in MT 0x79b94dac: System.StackOverflowException
Number of exceptions of this type:        1
Exception 0x1800003c in MT 0x79b94c74: System.OutOfMemoryException
Number of exceptions of this type:        3
Exception 0x28a74114 in MT 0x79bf881c: System.Threading.ThreadAbortException
_message: Thread was being aborted.
0x79a29496 [DEFAULT] [hasThis] Void System.Threading.Thread.Abort(Object)
0x030c28fa [DEFAULT] [hasThis] Void System.Web.HttpResponse.End()
0x030c2075 [DEFAULT] [hasThis] Void System.Web.HttpResponse.Redirect(String,Boolean)
0x02e2c898 [DEFAULT] [hasThis] Void ExceptionsAndStuff.WebForm1.Page_Load(Object,Class System.EventArgs)
Number of exceptions of this type:        4
Exception 0x077cf420 in MT 0x02b84e9c: System.Data.SqlClient.SqlException
_message: System error.
0x02bf9f18 [DEFAULT] [hasThis] Boolean System.Data.SqlClient.SqlDataReader.Read()
0x02fe432f [DEFAULT] [hasThis] I4 System.Data.Common.DbDataAdapter.FillLoadDataRow(Class System.Data.Common.SchemaMapping)
0x02e2f9cc [DEFAULT] [hasThis] I4 System.Data.Common.DbDataAdapter.FillFromReader(Object,String,Class System.Data.IDataReader,I4,I4,Class System.Data.DataColumn,Object)
0x02e2f849 [DEFAULT] [hasThis] I4 System.Data.Common.DbDataAdapter.Fill(Class System.Data.DataSet,String,Class System.Data.IDataReader,I4,I4)
0x02e2f688 [DEFAULT] [hasThis] I4 System.Data.Common.DbDataAdapter.FillFromCommand(Object,I4,I4,String,Class System.Data.IDbCommand,ValueClass System.Data.CommandBehavior)
0x02e2f4d5 [DEFAULT] [hasThis] I4 System.Data.Common.DbDataAdapter.Fill(Class System.Data.DataSet,I4,I4,String,Class System.Data.IDbCommand,ValueClass System.Data.CommandBehavior)
0x02fe7e96 [DEFAULT] [hasThis] I4 System.Data.Common.DbDataAdapter.Fill(Class System.Data.DataSet)
0x036ed5f4 [DEFAULT] [hasThis] Class System.Data.DataSet ExceptionsAndStuff.DBLib.GetData(I4)

Total 375 exceptions

If we take a look at the SqlException it’s message is System Exception which isn’t terribly helpful. SqlExceptions are a bit special since the actual information is stored in an error object off the exception so the best thing for these is to dump them out separately using the address from the !dae output.

0:000> !dumpobj 0x077cf420 
Name: System.Data.SqlClient.SqlException
MethodTable 0x02b84e9c
EEClass 0x02af9340
Size 68(0x44) bytes
GC Generation: 2
mdToken: 0x020001c4  (c:\windows\assembly\gac\system.data\1.0.5000.0__b77a5c561934e089\system.data.dll)
FieldDesc*: 0x02b84d98
        MT      Field     Offset                 Type       Attr      Value Name

0x79b947ac 0x4000029     0x34         System.Int32   instance 0 _xptrs
0x79b947ac 0x400002a     0x38         System.Int32   instance -532459699 _xcode
0x02b84e9c 0x4000fb5     0x3c                CLASS   instance 0x077cf464 _errors
Exception 0x077cf420 in MT 0x02b84e9c: System.Data.SqlClient.SqlException
_message: System error.
0x02bf9f18 [DEFAULT] [hasThis] Boolean System.Data.SqlClient.SqlDataReader.Read()

Then dumping out the _errors object and its error object and so on (follow the bolded items… )

0:000> !dumpobj 0x077cf464 
Name: System.Data.SqlClient.SqlErrorCollection
MethodTable 0x02b8500c
EEClass 0x02af93a4
Size 12(0xc) bytes
GC Generation: 2
mdToken: 0x020001c3  (c:\windows\assembly\gac\system.data\1.0.5000.0__b77a5c561934e089\system.data.dll)
FieldDesc*: 0x02b84f2c
        MT      Field     Offset                 Type       Attr      Value Name
0x02b8500c 0x4000fb4      0x4                CLASS   instance 0x077cf470 errors

0:000> !dumpobj 0x077cf470 
Name: System.Collections.ArrayList
MethodTable 0x79ba0d74
EEClass 0x79ba0eb0
Size 24(0x18) bytes
GC Generation: 2
mdToken: 0x020000ff  (c:\windows\microsoft.net\framework\v1.1.4322\mscorlib.dll)
FieldDesc*: 0x79ba0f14
        MT      Field     Offset                 Type       Attr      Value Name
0x79ba0d74 0x400035b      0x4                CLASS   instance 0x077cf488 _items
0x79ba0d74 0x400035c      0xc         System.Int32   instance 1 _size
0x79ba0d74 0x400035d     0x10         System.Int32   instance 1 _version
0x79ba0d74 0x400035e      0x8                CLASS   instance 0x00000000 _syncRoot

0:000> !dumpobj -v 0x077cf488 
Name: System.Object[]
MethodTable 0x01a2209c
EEClass 0x01a22018
Size 80(0x50) bytes
GC Generation: 2
Array: Rank 1, Type CLASS
Element Type: System.Object
Content: 16 items
------ Will only dump out valid managed objects ----
   Address	        MT	Class Name
0x077cf400	0x02b851a4	System.Data.SqlClient.SqlError

0:000> !do 0x077cf400
Name: System.Data.SqlClient.SqlError
MethodTable 0x02b851a4
EEClass 0x02af9408
Size 32(0x20) bytes
GC Generation: 2
mdToken: 0x020001c2  (c:\windows\assembly\gac\system.data\1.0.5000.0__b77a5c561934e089\system.data.dll)
FieldDesc*: 0x02b85090
        MT      Field     Offset                 Type       Attr      Value Name
0x02b851a4 0x4000fad      0x4                CLASS   instance 0x10015bb0 source
0x02b851a4 0x4000fae     0x10         System.Int32   instance 1205 number
0x02b851a4 0x4000faf     0x18          System.Byte   instance 61 state
0x02b851a4 0x4000fb0     0x19          System.Byte   instance 13 errorClass
0x02b851a4 0x4000fb1      0x8                CLASS   instance 0x077cf28c message
0x02b851a4 0x4000fb2      0xc                CLASS   instance 0x077cf3c8 procedure
0x02b851a4 0x4000fb3     0x14         System.Int32   instance 22 lineNumber

0:000> !do 0x077cf28c 
Name: System.String
MethodTable 0x79b925c8
EEClass 0x79b92914
Size 316(0x13c) bytes
GC Generation: 2
mdToken: 0x0200000f  (c:\windows\microsoft.net\framework\v1.1.4322\mscorlib.dll)
String: Transaction (Process ID 104) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
FieldDesc*: 0x79b92978
        MT      Field     Offset                 Type       Attr      Value Name
0x79b925c8 0x4000013      0x4         System.Int32   instance 150 m_arrayLength
0x79b925c8 0x4000014      0x8         System.Int32   instance 149 m_stringLength
0x79b925c8 0x4000015      0xc          System.Char   instance 0x54 m_firstChar
0x79b925c8 0x4000016        0                CLASS     shared   static Empty
    >> Domain:Value 0x000abfc8:0x18000224 0x00163890:0x18000224 <<
0x79b925c8 0x4000017      0x4                CLASS     shared   static WhitespaceChars
    >> Domain:Value 0x000abfc8:0x18000238 0x00163890:0x14005924 <<

As you can see there is plenty more information here you can gather, such as the stored procedure name etc. but I’ll leave those out since you can get them by simply running !dumpobj on the addresses.

Now, let’s say that you get a NullReferenceException in a function and you don’t really know where in the function you are or what could be null.

0:000> !dumpobj 0x3d86c980 
Name: System.NullReferenceException

Exception 0x3d86c980 in MT 0x79c04e64: System.NullReferenceException
_message: Object reference not set to an instance of an object.
0x2fa0536b [DEFAULT] [hasThis] Void ExceptionsAndStuff.WebForm1. btnAdd_Click(Object,Class System.EventArgs)
0x189b51ec [DEFAULT] [hasThis] Void System.Web.UI.WebControls.LinkButton.OnClick(Class System.EventArgs)
0x189b4f72 [DEFAULT] [hasThis] Void System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String)
0x189b4f22 [DEFAULT] [hasThis] Void System.Web.UI.Page.RaisePostBackEvent(Class System.Web.UI.IPostBackEventHandler,String)
0x189b4eea [DEFAULT] [hasThis] Void System.Web.UI.Page.RaisePostBackEvent(Class System.Collections.Specialized.NameValueCollection)
0x10920612 [DEFAULT] [hasThis] Void System.Web.UI.Page.ProcessRequestMain()

The top address on the stack trace will show exactly where we are at in the code (of btnAdd_Click in this case) so we can run !u to disassemble the function and see what it is doing at that location.

0:000> !u 0x2fa0536b 
Will print '>>> ' at address: 0x2fa0536b
Normal JIT generated code
[DEFAULT] [hasThis] Void ExceptionsAndStuff.WebForm1.btnAdd_Click (Object,Class System.EventArgs)
Begin 0x2fa05358, size 0x9d
2fa05358 57               push    edi
2fa05359 56               push    esi
2fa0535a 8bf1             mov     esi,ecx
2fa0535c 8b8e68010000     mov     ecx,[esi+0x168]
2fa05362 3909             cmp     [ecx],ecx
2fa05364 e8cf4313f7       call    26b39738 (System.Web.UI.HtmlControls.HtmlInputFile.get_PostedFile)
2fa05369 8bc8             mov     ecx,eax
>>> 2fa0536b 3909             cmp     [ecx],ecx
2fa0536d e8464613f7       call    26b399b8 (System.Web.HttpPostedFile.get_ContentLength)
2fa05372 3b053c8b640f     cmp     eax,[0f648b3c]
2fa05378 7e04             jle     2fa0537e
2fa0537a 33c0             xor     eax,eax
2fa0537c eb05             jmp     2fa05383
2fa0537e b801000000       mov     eax,0x1
2fa05383 25ff000000       and     eax,0xff
2fa05388 7448             jz      2fa053d2
2fa0538a 8bbe68010000     mov     edi,[esi+0x168]
2fa05390 8b8e98010000     mov     ecx,[esi+0x198]
2fa05396 8b01             mov     eax,[ecx]
2fa05398 ff90c4010000     call    dword ptr [eax+0x1c4]
2fa0539e 50               push    eax
2fa0539f 6aff             push    0xff
2fa053a1 8bd7             mov     edx,edi
2fa053a3 8bce             mov     ecx,esi
2fa053a5 ff1520c1640f     call    dword ptr [0f64c120] 

From this we can see that we have called the get method of the PostedFile property on an HtmlInputFile object, then we moved eax into ecx (eax normally contains the returnvalue from a function), and we are comparing it with itself de-referenced, and then we get an exception. You don’t really need to understand all of the assembly, it’s sufficient to look at the big pieces and conclude that likely PostedFile is null and we NullReference when we try to access ContentLength (which is the next thing we see in the code). Since you probably have the code for the function it’s even easier. So from here, just add a check for null on the PostedFile before using it and you’re good to go.

Leaving a debugger running and logging exceptions

I have shown you one way of leaving the debugger running and logging inside the debugger itself, but sometimes it’s convenient to do in a script since it might be your web admin or someone that needs to run this.

Create a config file called TrackCLR.cfg with the following contents

   <CMD>!load clr10\sos</CMD>
   <CONFIG><!-- This is for the CLR exception -->
    <CUSTOMACTIONS1>!cen;!clrstack;gn </CUSTOMACTIONS1>

And run adplus –pn myprocess.exe –c TrackCLR.cfg

This will generate a log file in a folder under the debuggers directory with managed stacks and exception types for each .net exception.

Or you can even take it one step further and create a dump when a specific exception occurs for example using this config file.

   <CMD>!load clr10\sos </CMD>
   <OPTION>NoDumpOnFirstChance </OPTION>
   <OPTION>NoDumpOnSecondChance </OPTION>
   <CONFIG><!-- This is for the CLR exception -->
    <CODE>clr </CODE>
    <CUSTOMACTIONS1>!clr10\sos.cce System.InvalidOperationException 1; j ($t1 = 1) '.dump /ma /u c:\temp_dumps\exceptiondump.dmp;gn' ; 'gn' </CUSTOMACTIONS1>
    <ACTIONS2>Void </ACTIONS2>

The cce (CheckCurrentException) command will set the registry $t1 to 1 or 0 depending on if the CLR exception matches the type you specified. (The 1 passed in as the second argument to cce specifies that we want register t1 and you can choose either t1 or t0 here)

j ($t1 = 1) is an if statement, so this will dump if register $t1 is set to 1, and otherwise just go.

Happy hunting…

-- All rules have exceptions, except the ones that don’t.  

  • One thing I should have mentioned 3 posts up is that the ObjectDisposedException _always_ occurs on the threadpool completion port thread (rather than any of the threadpool workers).

  • The following are based on problems I see people having every day in production ASP.NET systems.
  • I have written earlier about how to track down exceptions using configuration scripts for adplus.&amp;nbsp;...
  • i'd like to know more about orphaned case error in bluej, cause there is no help on their tutorials
  • im sorry to say that i unfortunately know nothing about bluej
  • Bravo!
  • hi tess,
    I have a question regarding creation of dump when a specific exception occurs. I noticed that the second TrackCLR.cfg file uses clr10 command. How do i do the same thing using version 2.0 of the clr? THanks
  • Boby,

    Here is a sample of a config file you can use (make sure you either store sos.dll in the windbg or other accessible directory or change the path for !load):

    This will dump on certain exceptions and just !clrstack on others, and you run it using

    adplus -c nameofconfigfile.cfg

           <RunMode> CRASH </RunMode>
      <OutputDir> c:\dumps </OutputDir>
    <Option> Quiet </Option>
    <ProcessName> w3wp.exe </ProcessName>


           <!-- defines a set of commands to execute before the sxe and bp commands -->
      <cmd>r $t1 = 0</cmd>
      <cmd>r $t2 = 0</cmd>
      <cmd>!load sos</cmd>



    <CustomActions1>!soe System.Exception 1;!soe System.InvalidOperationException 2;.if(@$t1==1 | @$t2==1) {.echo 'System.Exception or InvalidOperationException occurred';.dump /ma c:\dumps\myExceptionDump.dmp;gn} .else {.echo 'some other exception occurred';!clrstack;gn}</CustomActions1>


  • Hi Tess,

    Very interesting article, and cleared most of the exceptions in my application using sxe -c "!cen;!clrstack;gn" CLR, but then I found you are using adplus command... Wondering, if you could please explain me on where to write TrackCLR.cfg and how to run adplus.. On the command, if I give adplus, it is saying 'No information available'

  • Hi Ravi,

    Adplus is located in the windbg directory. If you copy the text above into TrackClr.cfg and put it in the same directory and then navigate there with the command line, you should be able to run

    adplus -c TrackCLR.cfg

    However, your way of doing it works perfectly well too, you are just doing it live.  The only thing adplus does is to attach with cdb and run sxe -c "!cen;!clrstack;gn" CLR in this case...    
  • Tess,

    Great article.  Will take me a week to learn it all.

    BTW, you are cute!

  • ADPlus is a tool that is used to take snapshots of processes in&amp;nbsp;environments where development-time...
  • I have talked in earlier posts about how to log and debug .net exceptions with WinDBG. All .NET exceptions

  • ADPlus is used to take snapshots of processes in environments where development-time debugging tools

  • The following are based on problems I see people having every day in production ASP.NET systems. 1 .

Page 2 of 4 (51 items) 1234
Leave a Comment
  • Please add 4 and 1 and type the answer here:
  • Post