Visio Insights
The official blog of the Microsoft Visio product team

The Improved Dynamic Grid in Visio 2010

The Improved Dynamic Grid in Visio 2010

  • Comments 19

In Visio 2010, we’ve made it easier to align and space shapes to make your diagrams look neat and organized. In a previous post we covered our new layout improvements that help clean up existing diagrams. In this post, we’re going to cover how improvements in Visio’s Dynamic Grid can help you drag a single shape and more easily position it in relation to other shapes on the page.

Turning On the Dynamic Grid

The Dynamic Grid is turned on by default for most diagram templates. You can turn it on or off by toggling the checkbox in the View tab:

clip_image002

Aligning shapes

To see the Dynamic Grid in action, simply drop a shape next to another shape and notice the orange lines that automatically appear:

clip_image003

In the example above, Visio detected that the selected shape matched the centerline of a nearby shape. If the shapes were of different sizes, Visio would attempt to align the shapes based on edge boundaries such as the top, bottom, left, or right edges of shapes in addition to the centerline:

clip_image004

Note that the Dynamic Grid only aligns the same edge boundaries of shapes. For example, a top edge of a shape will snap to the top edge of another shape, but not to the bottom edge of another shape.

Spacing shapes

The Dynamic Grid also displays orange line segments when evenly spaced shapes are found close to each other. This is useful for easily placing shapes in equal distances from one another. Simply drop a shape next to other evenly spaced shapes to see these line segments in action:

clip_image005

The Dynamic Grid scans both horizontally and vertically when displaying feedback. This allows you to easily position shapes in relation to many surrounding shapes:

clip_image006

Snapping to the Dynamic Grid

When either an alignment or spacing relationship is found between shapes, Visio will gently snap the shape you have selected to an invisible grid. This snapping behavior makes it easy to grab a shape using the mouse and position it next to other shapes.

Page margins and centerlines

To help position shapes within a page, the Dynamic Grid also supports margins around pages. You can snap to page margins by simply dragging a shape towards the top, bottom, left or right margins of a page. If the page is completely empty, you can also snap to the center of the page.

Container margins and centerlines

To help position shapes within a container, the Dynamic Grid also supports container margins and centerlines. You can snap to containers, such as swimlanes, by simply dragging a shape around the container margin or in the center of the container:

clip_image007 clip_image008

We hope you enjoy using the new Dynamic Grid feature and we’re interested in your feedback. You can use the Send a Smile feedback tool or comment on the blog to let us know what you think.

Leave a Comment
  • Please add 5 and 5 and type the answer here:
  • Post
  • You morons... you have NOT answered the question.   HOW DO YOU SHUT OFF THE SNAP TO GRID???

  • @Jim

    Thank you Jim so much!!!! Have been looking to turn off that snap and glue since ages.

  • Visio 2010 is horrible compared to Visio 2003. I class myself as an expert on visio 2003 but the new snap and glue functions are simply shocking.

  • It is the height of aggravation when they take a workable tool and make it less workable.  I've been using Visio since it first came out.  I can't express how much I am learning to hate the 2010 version.

Page 2 of 2 (19 items) 12