The official source of product insight from the Visual Studio Engineering Team
[Update 2/9/2010] The RC version of the extension is now available (using the same link). Users who installed this extension for Beta 2 and customized the theme for VS2010 Beta 2 : If you have installed VS2010 RC on the same computer, you may experience a "rainbow colored" VS. To remedy this problem, please do one of the following:
1. Follow the “Uninstall” instructions at the end of this post and make sure you uninstall the extension and do the cleanup as detailed. You will see Visual Studio starting up with random colors if you have kept the customization from Beta 2 OR customize again in Visual Studio 2010 RC using the Beta 2 version of this extension.
2. Install the RC/RTM version of the extension (now available at the link provided below). After installing the RC/RTM version of the extension and starting Visual Studio, you themes should be automatically upgraded, and the random colors should go away.
Many users have requested different color themes for Visual Studio, or for the ability to change color themes to suit their preferences. I have just released an extension for Visual Studio 2010 Beta 2 that allows users to customize colors used by our shell color service.
Colors used by the command and window management system can be customized using this extension. These are colors that can be read programmatically by anyone via the IVsUIShell.GetVSSysColorEx method. There are a number of specific tool windows (like the Toolbox and the Start Page) that use colors from this color service, so their colors can also be customized. However, other tool windows (such as the Solution Explorer) use native Win32 controls, which are rendered based on the current Win32 theme and are not inherently color-aware inside of Visual Studio. The text editor and tool windows based on it (such as the Output window) already use a different user-customizable color service (in Tools\Options\Environment\Fonts and Colors), and are not affected by this extension.
You’ll notice that the color service exposes hundreds of colors, accumulated over many releases of Visual Studio. It can be difficult to determine where colors are used in Visual Studio (I’m working on making it easier to determine where colors are used for a future version of the extension), and it may seem daunting to consider editing the values of hundreds of colors. However, there are a few ways to quickly create a new theme without spending hours—some helpful tips are included below.
You can learn more about the color service and other UI guidelines in the Visual Studio UX Guidelines document.
A frequent request for Visual Studio is an Expression-style theme, so let’s use that as a scenario for the walkthrough.
1. Install the extension. You can use the Extension Manager dialog inside Visual Studio (Tools\Extension Manager) and search for “visual studio color theme editor”, or you can download the VSIX file from here.
2. Create a new theme. After you install the extension and launch Visual Studio, you should see a new top-level menu called Theme. The two themes that ship with Visual Studio 2010 are available by default. The Default theme is the Visual Studio 2010 blue theme, and the High Contrast theme is the theme used when a Windows high-contrast theme is selected. The High Contrast theme is built entirely of Windows system theme colors, and as such has a limited palette. There are also three custom themes created as examples—feel free to use them as starting points for your own themes.
Choosing “Customize Colors…” brings up the dialog that will let you create a new theme. The built-in themes are not editable, but you can create a new theme using the hyperlink in the information bar or the toolbar button on the far left.
3. Change colors to gray. The Modify Hue/Saturation/Lightness option lets you saturate/desaturate or lighten/darken each color, or rotate the hues of each color. Hue, saturation, and lightness refer to aspects of the HSL color model; if you’re interested in more information about the HSL model and how it relates to RGB, Wikipedia has a great article. Using this dialog, we can desaturate all of the colors to gray by moving the S slider to –100.
4. Apply the theme. After applying the Modify Hue/Saturation/Lightness dialog, choose OK on the Customize Colors dialog. The new Gray theme will be applied and should now show up as checked in the Theme menu!
Bulk-editing operation will only get you so far, and you will soon want to change the value of a few individual colors. You can easily do this using the color picker popup. This popup lets you change the HSL or RGB values of the color directly, or modify the raw hexadecimal RGB value. You can also specify that the color should come from one of the Windows system colors. Pressing Enter or clicking Apply will save the value; pressing Escape or clicking away will cancel editing.
Hopefully everyone will happily use this extension forever, but some may decide to uninstall the extension. If you had any non-Default theme applied before uninstalling, you will find that the colors are still used after restarting Visual Studio (even though the extension is no longer installed).
The reason this happens is that the extension writes registry data to a value that Visual Studio always reads upon startup—even if the extension is not installed. This is a user-specific value (written to the HKCU Visual Studio registry hive), so every user can have their own theme. However, extensions in general are machine-wide. When uninstalling the extension, there isn’t a way to remove the custom theme data from each user’s registry hive, and so each user will have the last-applied theme still applied even after the extension is uninstalled. To avoid this problem, apply the Default theme before uninstalling the extension—applying the Default theme deletes this registry value instead of writing a custom color theme to it, so it will leave Visual Studio in a theme-free state (at least for your user account).
If you need to clean up these registry keys after uninstalling, you can run the following from a command prompt (replace 10.0 with 10.0Exp if you were using the experimental hive):
reg delete HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\10.0\UseDebugColorScheme /f reg delete HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\10.0\ThemeColorCache /f
> "However, extensions in general are machine-wide."
> Not by default (for VS2010). It would be more
> accurate to write that VS2010 extensions in general
> are per-user.
Yes, it seems you're correct, thanks for pointing that out.
In fact, it also matters whether or not you run Visual Studio as a normal user or administrator. I had been running Visual Studio as a normal user when making the walkthrough, but it appears you have to enable per-user extensions to be loaded explicitly when running as administrator (in Tools\Options\Environment\Extension Manager)
Eagerly looking forward to an updated version that works with the RC. The links above say this extension is unpublished.
I upgraded to the release candidate and I had a hypercoloured visual studio.
Deleting the registry keys you listed fixed it, thanks.
I also got the 'extension is unpublished' message when I follow the link. I'm looking forward to try it.
Thanks for the interest! I just published a new version of the extension (same link on the VS gallery) which should work for the RC and RTM. Any themes you previously created should be migrated forward onto the RC automatically, but please let me know if there are issues.
I've also included some upgraded system themes, since those were widely requested.
This new version is for 2010 RC only, right?
I got the "random colors" thing with beta 2. Well it don't really matters since RC is scheduled to be available today.
Thanks for the updated version!
brunoqc: Yes, the new version will only work on the RC (and should continue to work on the RTM).
What I would like is having all the windows background dark. Solution explorer and so on. VS2008 was changing only the editor background color...
Something like Expression Blend them, with a default dark theme. would be nice really.
Good work. Is there a way to backup or otherwise extract the config so that Themes can be shared or sent home/to colleagues?
Matthew, if you ever work on a color wheel for this, you could kill two birds by integrating it with the XAML editor - I'd love to be able to pull up a wheel to easily insert color values into setters and resources, and just in code actually. Today I copy and paste from Kaxaml.
I customized my Editor (not Visual Studio window) with a dark background, you can check it here: http://diegoponciano.com/DarkScheme.zip
@Diego awesome!!! Thank you!
Trying to match the visual studio window theme with the code editor theme (http://blog.prabir.me/post/My-Dark-Visual-Studio-Theme-Update.aspx).
wat about solution explorer tree view background, how can we change white to someting else. it would be great if we could also change icons.
Stephane and Prabir: The Solution Explorer uses a standard Windows TreeView (from Windows common controls), and so its rendering is tightly coupled with the Windows theme you use. It is possible (through Win32 subclassing) to override how a particular instance of a control is rendered, but it would require a lot of work (especially to make the control look correct on Windows Aero, Classic, etc.)
Luke: There's an Export toolbar button (looks like the standard Save button) in the "Customize Colors" dialog that lets you save a theme file, which you can then Import from that dialog on other machines. I'll have to check out Kaxaml's color wheel and see what it's like!
just wondering if this extension works with VS2010 Isolated Shell?
And If it does, how can I make it work?