The official source of product insight from the Visual Studio Engineering Team
Windows 8 brings a new app lifecycle model, in which Windows Store apps are automatically managed for the user. These apps always feel alive, even though they never run when they’re off the screen. This provides great benefits for power consumption and battery life.
Here are a few related blog posts we recommend for background reading on this topic:
The first challenge we encountered in this process was how to simulate the events your app would encounter with real world usage, so that you could debug those interesting cases. How could we simulate your app being suspended because a text message was sent and caused another app to activate? How could we simulate your app being terminated, without ending your debugging session?
One principle that we used in designing the solution was that we wanted the model to be simple, so that you could use a core set of debugging commands to simulate the variety of lifecycle events that your app might experience. Therefore, we decided to add the following three commands to Visual Studio: Suspend, Resume and “Suspend and Shutdown”.
You may wonder why we needed to create a “Suspend and shutdown” command. The goal of this command is to simulate the natural sequence of events that occur when your app is suspended and terminated by Windows 8. When an app gets suspended, it receives a suspending event, and the suspending event handler usually saves data the app may need when it is later activated (after going from suspended to terminated state). We observed users try to simulate this in other ways on the pre-release bits. For example, we saw some users just stop debugging, which would shut down the app, but there would be no suspending event triggered. Other users would explicitly close the app by pressing Alt+F4 or by dragging it to the bottom of the screen. In that case, a suspending event would be triggered before the app was terminated; however the next time the user activated the app, its PreviousExecutionState would be ClosedByUser (which is not what we’re trying to simulate). Therefore, the “Suspend and shutdown” command provides a way to simulate your app being suspended and terminated by Windows, as opposed to being explicitly closed by the user.
The next question we faced in the design process was how to expose these commands.
In the Visual Studio 2012 Beta release, we created dedicated buttons for these commands in the “Debug Location” toolbar. We chose this toolbar because it provides the unique ability to select a process during run mode. This makes it easy to determine which process to apply the commands to, when debugging multiple processes.
Starting in Visual Studio 2012 RC (and continuing for Visual Studio 2012 RTM), we collapsed these buttons into a dropdown list on the same “Debug Location” toolbar. The dropdown design provided more space for the multiple commands which we wanted to expose, without cluttering the toolbar:
Please note that the “Debug Location” toolbar is not always enabled. Therefore, if you don’t see this toolbar, please enable it through the View menu:
Another case that we wanted to allow you to simulate in the debugger is app activation.
When you start debugging your Metro style app in Visual Studio, by default the app automatically gets activated. (This occurs in a very similar way to tile activation.)
However, there are also other ways your app can be activated, which you’ll want to simulate as well. For example, your app can receive some content shared from another app, and get activated through contract or extension. (See the Sharing content target app sample for more info on how this works.)
Starting in the beta release of Visual Studio 2012, we added the ability for you to change the project properties to not launch the app when you start debugging (in order to simulate these other activation scenarios). When you start debugging your project with this option set, Visual Studio 2012 goes into debug mode but nothing actually runs yet. You’ll also notice that the “Debug Location” toolbar shows your project name instead of a running process.
This indicates that the app package deployed by this project is in debug mode, and as soon as an app from that package gets activated, the debugger will attach to the process.
For example (as described in the Sharing content target app sample mentioned above), we can simulate sharing text from another app and selecting the sample app as the share target. In that case, the app gets activated and we can debug it:
Note that now the “Debug Location” toolbar shows the actual process that is running.
There’s one more Windows 8 behavior that we wanted to allow you to simulate in the debugger, and that is background tasks. The idea behind background tasks is that your app may need to perform certain actions in the background, while the app is off-screen and not running. To learn how to program background tasks, please see the following post on the Windows 8 app developer blog: Being productive in the background – background tasks.
We designed the debugging experience for background tasks to utilize the same auto-attaching functionality as at runtime. That is, when your package is in debug mode, the debugger will automatically attach to the host process once it starts.
Given that you can debug apps from multiple packages at a time, we needed to present these in a control that had the ability to expand based on the number of tasks. Therefore, we added these to the same “Debug Location” toolbar dropdown control as shown above. As a result, the trigger commands of all background tasks registered for currently active packages will appear in this dropdown. As an example, when debugging the Background Task sample, you will see the following background tasks in the dropdown list (once registered).
Next, to debug a background task, add a break point to the Run method and trigger the background task:
And that’s how easy it is to debug your background task!
Please note that there are just a few exceptions to this design… Background tasks that have a data payload (for example, TriggerDetails in the IBackgroundTaskInstance) cannot be triggered through Visual Studio and must be triggered naturally by the system instead, in order to debug. Similarly, for the ControlChannel, PushNotification, and SmsReceived triggers. However, all other background task triggers can be triggered via Visual Studio.
The Windows 8 app lifecycle model presents some new debugging scenarios to consider, as you develop your Windows Store apps. Using Visual Studio 2012, you can simulate the events and states that your app will encounter, as it gets suspended and resumed. Visual Studio 2012 also provides a way to debug different app activation mechanisms, by putting the package in debug mode without activating the app. Finally, you can use the Debug Location toolbar dropdown to trigger background tasks. For more information on this topic, please reference the MSDN documentation. We look forward to hearing what you think on Connect, the Forums, or UserVoice!
Dmitri Leonov – Software Development Engineer in Test, Visual Studio Ultimate team.
Special thanks to Lisa Feigenbaum for contributing to this blog post.
Thanks Dmi good post!
Thanksk M.Radwan. Great post thanking Dmitri for good post!
Metro is a confusing term. It has been double defined. It means the new Microsoft UI Design. But it also is applied to Win RT apps.
What Microsoft really, really wants to succeed is Win RT. (So they can claim part of the mobile pie that they have so very little of now.)
There are two kinds of developers that can be attracted to Win RT. Those wanting to make $$$ and those passionate about most any new kind of development (especially mobile).
The first group will come. A few will make real apps. Most will make silly fart apps or something like that.
The second group is a problem though. Because they are the same group that are active on the blogs and User Voice. Many (if not most) of these are very upset about the new Visual Studio UI. (Though it is really more about the apparent lack of "listening" to the opinions of these people.)
The real problem you have is that the Visual Studio UI changes were done in the name of "Metro". That creates a lot of negative Goodwill on the word "Metro". Even though Win RT is different from the actual Metro UI style, they have been lumped together by many of these developers.
So my making all these "passion" based developers angry at the UI (under the cause of "Metro") you have soured many of them on Win RT (which is also being called "Metro").
You took a huge hit in the War (Win RT and mobile) so that you could win one battle (the "Metrofication" of Visual Studio).
I didn't realize there was a variable-length list of items under that "Suspend" button -- given that, it makes sense to have it as a dropdown list instead of individual buttons. But it's a pain when I'm trying to test that my app saves its state correctly on suspend+terminate, because the button doesn't remember which option I used last; I have to go through the same ritual of selecting from the dropdown list, over and over and over as I do my testing.
Is there some way I can bind a keystroke to the "suspend and shutdown" command, or choose to give it its own toolbar button? There's no "suspend" command listed in Tools > Options > Environment > Keyboard, so if there's any way to do this, it isn't obvious.
@Joe White: These commands are indeed not properly exposed, this is a known issue in this release. We are looking at ways of improving the experience, so thanks for sharing your feedback.
Unrelated to this article, but really,,, is anyone going to respond to the UI concerns? Ever?
Bluetooth library is available in visualstudio2010?
Everything is working fine. All of a sudden my background tasks has stopped debugging and past 6 hours I have no clue of what has gone wrong...
My problem didn't get solved but I came across this nice article. Thanks for bringing up the 'Debug Location'...
The stupidest UI ever designed, it just makes you sickened every time you look at it!
I'am trying to instal Visual Studio 2012 no Windows 8 but when that's happens i recieve these messege:
The .Net Framework
installed on this machine does not meet the minimum required version: 4.5.50709
Win 8 have all ready .net framework 4.5, so i can't understant these messege
I have tryied to unistal the Framework and re-instal, but it didin't work.
Does someone have a solution?
Is there a difference in Win8.1 between the Alt+F4 gesture and the dragging down? If I do the former then I do indeed get to the suspend under the Visual studio debugger and it will come back up as ClosedByUser, however if I do the drag gesture, then VS just sits forever until I explicitly hit the stop, and then I get NotRunning and not ClosedByUser when I restart.