Welcome to MSDN Blogs Sign in | Join | Help

One of those irritating technical things

I was watching my local educational access channel this morning while walking on my treadmill. I thump pretty hard when I walk so I turned the TV up. That’s when I really started thinking about the volume control feedback. Why the hell does the volume go from 0 to 63? As a computer-savvy person I can sort of understand it, but come on now, 0 to 63? One of our televisions goes from 0 to 50. Ok, 50 is a ‘round’ number (at least to us who count using base-10). I don’t like 0 to 50 and would personally prefer 0 to 100 (still takes one byte of storage if that’s the problem) because then I might translate that to a percentage. But, ick. Is this worse than a stereo that goes to 11?

Published Thursday, January 20, 2005 1:35 PM by mikemill
Filed under:

Comments

# re: One of those irritating technical things

My home stereo goes from NEGATIVE 100 (quiet) to 0 (loud). Figure that one out.
Thursday, January 20, 2005 1:52 PM by Patrick

# re: One of those irritating technical things

Better yet, when a loud mouth commercial comes on that is twice as loud as the show, why doesn't the volume automatically compensate. Common, my car radio even does that.
Thursday, January 20, 2005 2:08 PM by Dave

# re: One of those irritating technical things

That's probably some kind of decibel adjustment Patrick. The stereo is probably outputting the sound at maximum volume, and then dampening it by appling a volume reduction based on the position of the volume knob. I've seen volume controls at a movie theater that went from -10 to +10.

The TV situation reminds me of when I tried to explain to a friend why in Final Fantasy VII on the original PlayStation, tripling the cost of a spell that cost 250 to begin with resulted in a cost of 255.

For what it's worth, my TV goes from 0 to 40, which is arguably just an extension of 0-10 with quarter point stops.
Thursday, January 20, 2005 3:47 PM by Neyah

# re: One of those irritating technical things

Dave is correct. Traditional VU (volume unit) meters display 0 db at "maximum" volume, with +3 db "overdrive" and -60 or -80 db "minimum". Since decibels are logarithmic -100 db is very, very quiet--quieter than most amps can manage due to tiny amounts of residual hum.

Sound pressure level requires a 3 db change to be perceptible, which requires double the amplifier power. Doubling the sound pressure level requires 10 times as much power.
Thursday, January 20, 2005 9:53 PM by Steve

# re: One of those irritating technical things

I just remember that great moment in Spinal Tap where the guy is asked why his amp has 11 as max. The answer is that every rocker plays at 10 so 11 is even louder!
Tuesday, January 25, 2005 1:11 PM by Andrew
New Comments to this post are disabled
 
Page view tracker