VS08Setup

Free People Searches » Visual Studio 2008 Setup troubleshooting guide

Free People Searches » Visual Studio 2008 Setup troubleshooting guide — Wed, 05 Dec 2007 04:04:13 GMT

PingBack from http://www.absolutely-people-search.info/?p=3118

The Start of the Visual Studio Avalanche

Do programmers dream in Byte Code? — Thu, 06 Dec 2007 00:23:29 GMT

The Avalanche of add-on's for Visual Studio 2008 has started. I thought it would be useful to keep

Links to Visual Studio 2008 setup known issues and troubleshooting information

Aaron Stebner's WebLog — Tue, 11 Dec 2007 01:30:49 GMT

There are a couple of links that I want to post here in the hopes of making them easier to find for anyone

re: VS08Setup

Tom van Stiphout — Sat, 22 Dec 2007 21:11:36 GMT

You wrote: "6. Components in front of “Depcheck:” are the ones that you need to uninstall before continuing with the install. A) Gencomp97 corresponds to Microsoft Web Designer Tools B) Gencomp97 corresponds to Microsoft Document Explorer 2007 (not 2005). Please note that there could be other components too."

Did you mean to write that one of these two corresponds with Gencomp320?

consultant reservoir engineer

osman mostafa — Sat, 19 Jan 2008 03:01:17 GMT

I need this product for parallel computing simulation

Jan 24th Links: ASP.NET, ASP.NET AJAX, Visual Studio, .NET, IIS

Community Blogs — Fri, 25 Jan 2008 10:22:10 GMT

I just arrived back from my trip from Asia, and decided to celebrate (since I'm jet-lagged and can't

Links 24/Jan: ASP.NET, ASP.NET AJAX, Visual Studio, .NET, IIS

Mutamblog — Fri, 01 Feb 2008 23:46:18 GMT

Links 24/Jan: ASP.NET, ASP.NET AJAX, Visual Studio, .NET, IIS

re: VS08Setup on 2008 server

Steve Kovner — Mon, 04 Feb 2008 17:16:29 GMT

I installed VS2008 on Server 2008 RC2. No errors during installation; the log file looks fine.

But it doesn't work afterwards. I cannot compile C++, or debug C#.

Trying to compile a C++ program says the "C++ project engine is not properly installed", followed by a VS crash. (I've sent the error report)

Trying to debug C# says the debugger isn't installed. If I try to register it, I get access denied - and that is as administrator.

Can I get this to work? Cross-compiling a project that involves C++, COM, and .NET gets very messy; would prefer to build on the target platform (2008 server, x64)

I've Visual Studio 2008 Beta2 installed, how do I install official final release version of Visual Studio 2008

VarunGupta — Wed, 06 Feb 2008 02:16:26 GMT

- Just go to Add/Remove programs and uninstall 'Visual Studio 2008 Beta2\code name Orcas products' -

I've Visual Studio 2008 Beta2 installed, how do I install official final release version of Visual Studio 2008

Noticias externas — Wed, 06 Feb 2008 02:37:20 GMT

- Just go to Add/Remove programs and uninstall 'Visual Studio 2008 Beta2\code name Orcas products'

re: VS08Setup

Varun Gupta — Thu, 07 Feb 2008 07:44:10 GMT

Hi Tom van Stiphout,

You are right, I meant to write gencomp320 in place of gencomp97 in one of the places..Thanks for pointing it out..

re: VS08Setup

Varun Gupta — Thu, 07 Feb 2008 07:51:25 GMT

Hi Steve Kovner,

Sorry to hear about your issue. I would try to help you here.Can you refer to following post and upload zip file to http://skydrive.live.com/ or some other server & send me the link.

http://blogs.msdn.com/astebner/archive/2007/08/01/4172276.aspx

-Varun

re: VS08Setup

Steve Kovner — Sat, 09 Feb 2008 02:44:05 GMT

I can put the logs on a company FTP server, but I'd rather not post the password. Is there a way to email you the password?

You can email me at

steve dot kovner at mirror-image dot com

Thanks

re: VS08Setup

Steve Kovner — Mon, 11 Feb 2008 18:57:42 GMT

I have put the file vslogs.cab in a skydrive shared directory, with the name VS2008

However, I'm not sure how to refer to this directory.

I gave you explicit permissions (both from your email address and the vsdeployment one)

If you have trouble accessing them, please respond.

They use my verizon email address, given above.

re: VS08Setup

Steve Kovner — Mon, 11 Feb 2008 18:58:55 GMT

Sorry - I used my verizon email as my windows live id, and gave my work email.

The windows live one is

steven dot kovner at verizon dot net

re: VS08Setup

Nathan — Wed, 13 Feb 2008 21:05:49 GMT

Is it possible to install Visual Studio 2008 Professional Edition on Windows XP Pro, SP2? I've tried on three machines so far, each resulting in the following stop error:

STOP: 0X0000008E (0XC0000005, 0X805E024F, 0XA00DBB00, 0X00000000)

All three machines check out fine under the Windows Memory Diagnostic.

vs2008 相关更新

曹振华 — Thu, 14 Feb 2008 05:09:14 GMT

ASP.NETMVC框架路线图更新

【原文地址】ASP.NETMVCFrameworkRoad-MapUpdate

【原文发表日期】Tuesday,February12,200...

re: VS08Setup

mehdi — Sun, 17 Feb 2008 06:13:47 GMT

when run project in vs 2008 show error message under:

error while rtying to run project:could not load file or assembly 'AssemblyName' or

one of its dependencies.the moudle was expected to contain an assembly manifest.

re: VS08Setup

mehdi — Sun, 17 Feb 2008 06:14:31 GMT

when run project in vs 2008 show error message under:

error while rtying to run project:could not load file or assembly 'AssemblyName' or

one of its dependencies.the moudle was expected to contain an assembly manifest.

re: VS08Setup

George Harris — Thu, 28 Feb 2008 23:58:49 GMT

I have the same problem than Steve Kovner

when i install visual studio 2008 team system the setup program says that it could not register vsmacros.dll and VCProjectEngine.dll the code error is: 1911

and when Trying to compile a C++ program says the "C++ project engine is not properly installed".

VisualStudio 2008 install failing because of pre-release products

Kim Hamilton — Wed, 26 Mar 2008 22:14:55 GMT

I can get my work machines into pretty odd states due to various private/beta versions of Microsoft products

re: VS08Setup

Cigno — Sat, 05 Apr 2008 11:44:36 GMT

I have Vista 64 SP1.

Cab error installi MSDN library for VS2008.

I uninstalled Microsoft Document Explorer, the i run msdn library setup again and everything started working fine.

Hope this might help

cheers

re: VS08Setup

Johannes — Fri, 11 Apr 2008 11:50:47 GMT

Hallo

I just got Visual Studio 2008 Standard Edition. I uninstalled all express editions and restarted my computer. Then when I insert the VS2008 installation DVD my computer can’t access it. Any other DVD works but not the VS2008 disc. The DVD light just flicker the whole time but nothing further. Any suggestions?

re: VS08Setup

Pranav — Mon, 14 Apr 2008 13:53:48 GMT

Here is my error and I cant seem to resolve this with so many solutions I have tried.

[01/28/08,17:15:21] setup.exe: ***ERRORLOG EVENT*** : ISetupComponent::Pre/Post/Install() failed in ISetupManager::InternalInstallManager() with HRESULT -2147467259.

re: VS08Setup

shafeer — Tue, 15 Apr 2008 10:02:22 GMT

Hello Varun,

A good detailed problem solver i could say...

I need an help from u... can u plz send me Cab26.cab file to my mail id

shafeer.ali<at(encrypted for security reason)>gmail.com

so that i will not be downloading 3.8 gb files again. your help in this rgard is required.

Regards

Shafeer

re: VS08Setup

joe0532@hotmail.com — Thu, 01 May 2008 20:48:34 GMT

I found that if you move the location of program files and the specified location ends with / (i.e. e:\, instead of e:); the install will fail at the Web Authoring Component.

re: VS08Setup

raghu — Thu, 19 Jun 2008 12:10:34 GMT

I am Having the same problem of installing Vs2008 like

DepCheck: gencomp320

but in my system there is no Microsoft Document Explore 2007 but still iam getting the error and more over the installation is giving error after installing Microsoft Document Explore 2008 can you please help me

re: VS08Setup

Data capped — Wed, 10 Sep 2008 04:09:04 GMT

c1) Try downloading again.

All 3.3Gb of it? Why does it seem to me like a really bad idea to bundle everything in to one big iso... 6.6Gb just to not really know what it was?

re: VS08Setup

gokce — Fri, 29 May 2009 23:28:48 GMT

Having this problem:

setup.exe: ***ERRORLOG EVENT*** : ISetupComponent::Pre/Post/Install() failed in ISetupManager::InternalInstallManager() with HRESULT -2147467259.

any help?

re: VS08Setup

Varun Gupta — Tue, 02 Jun 2009 19:52:38 GMT

Hi gokce,

Can you post your question to following forum?

http://social.msdn.microsoft.com/Forums/en-US/vssetup/threads

Various folks (including me) help on that forum.

-Varun

re: VS08Setup

Michael Paul — Tue, 11 Aug 2009 16:25:35 GMT

Received the DW20.exe cannot be copied error. Repaired .NET 3.5 Framework on 2008 server and was able to install VS2008. Comments I found in another blog:

"I've seen two other reports of this issue, and we think it is related to the .NET FX 3.5 Setup not succeeding. If you can send me email (scottgu@microsoft.com) I can loop you in with someone who can help investigate and get this fixed."